Advertisement
Available languages
Available languages
> REC BALANCE
control
To balance the recording level between left (L) and right (R)
channels.
3 PHONES jack
4 Rewind button (~d-4)
To rewind the tape in the direction of the arrows. When this
button is pressed
during playback of a selection, the same
selection will be played again. If pressed in the blank between
two selections, the selection before the current tape position
will be played. The unit will skip one selection in reverse
direction for each time the (~#~<) button is pressed.
( Stop button( HM)
~ ~
To stop all operations.
(© Playback button ( > )
To playback the front side of the tape, that is the side whose
label is visible.
{) Fast forward button (>>)
To fast-forward the tape in the direction of the arrows. When
pressed during playback, the unit will skip one selection in
forward direction for each time the (bP) button is pressed.
42
Recording button (@)
When the recording (®) button is pressed. the unit is set to
recording standby mode.
Press the pause (EB) button or playback (B») button when
ready to record.
The unit will not enter the recording standby mode if loaded
with a cassette with broken erasure prevention tabs.
(9) Pause button (9B)
To
stop
tape
transport
momentarily
during
recording
or
playback. To resume operation press it again. This can also
be done by pressing the playback (B) button. This button
does not work during fast-forward and rewind.
@ Recording mute button ( © )
Press this button during recording to create a blank portion of
approx. 4 seconds on the tape. The unit will then enter the
recording standby mode.
To make a blank space longer than 4 seconds, the button can
be held depressed for the desired duration. Upon releasing
the button, the unit will enter the recording standby mode.
@) PHONES LEVEL control
Advertisement
