Beko BDIN38530A User Manual page 13

Hide thumbs

Table Of Contents

Table of Contents

Preparation

Remove the test

Turn on the tap and

strip from the

let the water run for

packet.

about a minute.

After determining hardness level of the supply water:

1. Pres the settings menu key for 3 seconds to enter the Settings Menu.

In some models pressing the Menu key only for once will allow you to enter the

Settings menu.

2. Using <- and +> keys, proceed until the water hardness setting indicator becomes on ("r"

position will be displayed).

3. Using the Selection key, adjust water hardness level according to the hardness of the

supply water. For correct setting please see "Water hardness level setting table".

4. Press On / Off key to save the setting.

5. Press the Menu key to exit the settings menu. Your setting will be saved automatically.

Water hardness level adjustment table

Hardness

English Water

Level

Hardness °dE

Level 0

0-5

Level 1

6-9

Level 2

10-15

Level 3

16-19

Level 4

20-24

Level 5

25-62

In order to protect your glassware against glass corrosion in an optimal way, you have to

perform the same hardness settings, which you have made in the control panel, with the

regeneration setting switch.

For example, if you have adjusted to "3rd level" in the control panel, also set the

regeneration adjustment switch to 3rd level.

Regeneration Adjustment Switch

Hold the test strip in

the water for about

a second.

German Water

French Water

Hardness °dH

Hardness °dF

0-4

0-8

5-7

9-13

8-12

14-22

13-15

23-27

16-19

28-34

20-50

35-90

0th Level

Remove the test

Wait for 1 minute.

strip from the water

and shake it.

Water Hardness Level Indicator