Cancelling The Programme; Salt Indicator ( ); Rinse Aid Indicator ( ); Adjusting The Amount Of Rinse Aid - Beko BDIN38530A User Manual

Table of Contents

Advertisement

Operating the product
C
Pay attention not to open the
door of the machine when it is
running. There may be a rush of
vapour when you open the door
of your machine; be careful.
C
The machine will remain silent
in pause mode for some time
in order to remove the water
from the machine and on the
dishes completely and to have
the water softener cleaned, and
then it will resume running in
drying mode.

Cancelling the programme

Open the door of the product Press and
hold the Programme Selection / Programme
Cancel keys for 3 seconds. After the 3 -
2 - 1 countdown, 0:01 is displayed, close
the door of the product and wait for the
draining process complete. Draining is
completed in 2 minutes and the machine
gives an audible warning when it is
completed.
C
There might be residues of
detergent or rinse aid in the
machine and/or on the pieces
being washed depending on the
step the programme you have
cancelled was in.

Salt indicator ( )

Please check the salt indicator on the
display to see whether there is adequate
amount of softening salt in the dishwasher
or not. You need to refill the salt reservoir
with salt whenever salt indicator appears
on the display of your machine.
C
Adjusting the water hardness
level is explained in Water
Softening System section.
/

Rinse Aid indicator ( )

Please check the rinse aid indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher or
not. You need to refill the rinse aid reservoir
with rinse aid whenever rinse aid indicator
appears on the display of your machine.
Adjusting the amount of
rinse aid
1.
After switching on your machine, press
the Menu key for 3 second.
C
Some models require pressing
Menu key once to enter settings
menu.
2. Using <- and +> keys, proceed to "P:"
on the display.
3. Set to the appropriate level with the
Selection key.
4. Press On / Off key to save the setting.
No rinse aid dispensed in P:0 wash position.
1 dose of rinse aid is dispensed in P:1
position.
2 doses of rinse aid are dispensed in P:2
position.
3 doses of rinse aid are dispensed in P:3
position.
4 doses of rinse aid are dispensed in P:4
position.
39 / 48 EN

Advertisement

Table of Contents
loading

Table of Contents