Connect To Power Supply - Philips NeoPix 530 User Manual

Front Ceiling
1 Mount the projector on the ceiling with
upside up in front of the projection screen.
A projector mount is required to mount the
projector on ceiling.
2 If the projection direction is incorrect,
press on the remote control to open
the settings menu, go to Projector > Install
Mode > Front Ceiling and press the OK
button.
Rear
1 Place the projector on a table behind the
projection screen. A special rear projection
screen is required.
2 If the projection direction is incorrect,
press on the remote control to open
the settings menu, go to Projector > Install
Mode > Rear and press the OK button.
8
Rear Ceiling
1 Mount the projector on ceiling with upside
up behind the projection screen. To mount
the projector on ceiling behind the screen,
a projector mount and a special rear
projection screen are required.
2 If the projection direction is incorrect,
press on the remote control to open
the settings menu, go to Projector > Install
Mode > Rear Ceiling and press the OK
button.

Connect to power supply

CAUTION!
Always use the
projector on and off.
1 Select a supplied power cable with the
correct plug (EU/UK/US).
2 Connect the power cable to the power jack
at the bottom of the projector.
3 Connect the power cable to an electrical
socket.
• The power LED on the projector lights
up in red.
b
button to turn the
c
Philips · NeoPix 530