Using The Security Lock - Yamaha EC-03 2012 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Error warnings
If a problem is detected, the warning
light comes on. In this case, check for
1
the warning mark "
mark also appears, have a Yamaha
dealer check the vehicle.
2
Warning mark "
3
This warning mark flashes if a problem
is detected. If the warning mark keeps
flashing after turning the key to "OFF"
4
and then back to "ON", have a Yamaha
dealer check the vehicle.
5
TIP
After turning the key to "ON", the warn-
6
ing mark appears. If the warning mark
goes out after a few seconds, there is
7
no malfunction. Go ahead with riding.
8
9

Using the security lock

The EC-03 is equipped with a security
lock that can be used by registering a
". If this warning
security number. Once the security
number has been set, the vehicle can-
not be ridden unless the correct securi-
ty number is entered, even if the key is
"
turned to "ON".
Registering and changing the secu-
rity number
WARNING
Be sure to stop the vehicle before
registering or changing the security
number. Changing settings while
riding can distract the operator and
increase the risk of an accident.
TIP
The
change mode is canceled if the regis-
tering procedure is not completed in
one minute. If the mode cancels, repeat
the procedure.
1. Turn the key to "ON".
All display segments appear for a
few seconds, then the vehicle en-
security number registration/
4-7
EAU50034 ters the standby
"PUSH" flashes.
1
EWA15611
1. Security lock indicator "
TIP
When the security lock has been
locked, the security number indicator
" LOCK" appears when the vehicle is
in the standby mode.
2. Change to the riding mode by
pushing any of the buttons.
mode and
LOCK"