Asus ProArt 8ASPA348CGV User Manual page 30

Table of Contents

Advertisement

* FreeSync Premium Pro can only be activated within 48Hz~120Hz
(DisplayPort, USB Type C).
VRR can only be activated within 48Hz ~100Hz (HDMI).
* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
To activate this function, you need to do the following: turn off PIP/PBP,
set Aspect Control to Full, set DisplayPort Stream to DisplayPort 1.2 or
DisplayPort 1.4.
Dynamic Dimming: Synchronizes with contents while contrast
changing to execute backlight dynamic dimming. You can adjust the
synchronization speed as "Fast", "Medium" or "Gradual".
To activate this function, you need to do the following: turn off
Rapid Rendering
USB Setup: Configures the USB Type C port setting. The USB Setup
parameter affects the output resolution only when the source is connected
to the USB Type C port. Due to the technological differences between
USB 2.0 and USB 3.1, THE maximum USB data throughput (bandwidth
and other related characteristics) varies and therefore influences the
maximum output resolution.
*
*
The data transfer rate will remain USB 3.1 when using USB Type C to A cable.
The USB Setup setting does not affect the resolution if the source is connected
to the DisplayPort or HDMI port.
Power Level: Select Normal Level for power on hub during power
saving. Select Deep Level for power off hub during power saving.
OSD Setup:
*
*
*
DisplayPort Stream: Compatibility with graphic card. Select DisplayPort
1.1, DisplayPort 1.2 or DisplayPort 1.4 by graphic card DP version.
To activate this function, you need to do the following: turn off FreeSync
Premium Pro/VRR.
3-10
Mode.
USB 3.1: The data transfer rate according to the 3.1 specification
in USB Type C port only have Two lanes for Main Link.
USB 2.0: The data transfer rate according to the 2.0 specification
in USB Type C port only have Four lanes for Main Link.
Adjusts the OSD timeout from 10 to 120 seconds.
Enables or disables the DDC/CI function.
Adjusts the OSD background from opaque to transparent.
Chapter 3: OSD (On-Screen Display) menu
PIP/PBP and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proart pa348cgv series

Table of Contents