Sealey WORKSAFE SSP76 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT
IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. INTRODUCTION
BS EN 166 BT 3 - Manufactured from polycarbonate for superior durability and resistance. Offers full face protection with an increased
range of mobility compared to a standard face protector. Curved face shield conforms to the shape of the face offering improved
protection. Detachable indirect vented goggles to allow for extra versatility. Features a wide-angle curved lens for enhanced visibility.
Adjustable headband with soft PVC frame provides added comfort.
Notified Body: 0086
Type Examination Certificate Number: CE 712096
Carried Out By: BSI Assurance UK Limited
2. SAFETY
Ensure the goggles fit well to avoid slippage and discomfort.
9
Adjust the headband by pulling/loosening the headband through the buckle.
9
This product is designed for face and eye protection against high speed particles of medium energy impact at extremes of temperature.
9
The visor is designed to be lightweight and comfortable to wear.
9
The product protects against high speed particles worn over standard ophthalmic spectacles, but may transmit impacts, thus creating a
9
hazard to the wearer.
Avoid liquids as small particles can splash into the eyes.
9
Inspect the goggles frequently as a pitted, scratched or dirty face shield reduces vision and should be replaced immediately.
9
DO NOT use if any part of the goggles is cracked or broken.
8
DO NOT place this product on a hot surface.
8
DO NOT use these against heavy impact hazards.
8
DO NOT use these goggles for welding.
8
IMPORTANT: if protection against high speed particles at extremes of temperature is required, then the selected eye-protector should
be marked with the letter 'T' immediately after the impact letter, i.e. FT, BT or AT. If the impact letter is not followed by the letter 'T' then
the eye protector shall only be used against high speed particles at room temperature.
3. APPLICATIONS
3.1. EN 166 CATEGORISATION
• Optical Class 1
3.2. MECHANICAL STRENGTH
• BT - High speed particle - medium energy impact at extremes of temperature
• 3 - Protection against droplets of liquid
3.3. EN 170 CATEGORISATION
• 2C-1.2 - Clear lens
4. MAINTENANCE
4.1. CLEANING
DO NOT use abrasive materials.
8
Using a soft and clean brush or cloth, use warm suds to wash and clean. Ensure hands are clean (without grease).
9
Materials which may come into contact with the wearer's skin could cause allergic reactions to susceptible individuals. The contact
9
areas should be disinfected regularly.
4.2. STORAGE
Store in a bag or case out of direct sunlight, away from chemicals and abrasive substances, in a clean dust free environment.
9
Use original bag for transportation if possible.
9
4.3. OBSOLESCENCE
Product shelf life/expiry date is dependent on correct storage and general use.
9
Inspect the goggles frequently as a pitted, scratched or dirty face shield reduces vision and should be replaced immediately.
9
© Jack Sealey Limited
SAFETY GOGGLES WITH DETACHABLE
FACE SHIELD
SSP76
MODEL NO:
Original Language Version SSP76 Issue 1 20/11/23