Advertisement
Connecting the TV
Follow these instructions to connect the HDTV tuner and CD-R/RW drive to your TV (tuner is not available in all
locations). For instructions on connecting other equipment, see your TV User's Guide. Make sure your TV is unplugged
before connecting to it.
Connecting the HDTV Tuner
1
Slide the OUTPUT SWITCH on the back of the tuner to Y Pb Br.
2
Connect one end of the component video cable to the Y (green), PB
(blue), and PR (red) Component Input 1 connectors on the back
of the TV, as shown. Be sure to match the colors of the cables to the
colors of the connectors.
3
Connect the other end of the cable to the Y, Pb, and Pr connectors on
the tuner.
4
Connect one end of the audio cable (with red/white connectors) to the
L–Audio–R connectors on the back of the TV.
5
Connect the other end of the audio cable to the L–Audio–R
connectors on the tuner.
6
Connect your antenna cable to the RF IN jack on the tuner.
See the tuner User's Guide for details.
7
Plug the tuner's power cord into an electrical outlet.
Connecting the CD-R/RW Drive
Note
The connectors on your CD-R/RW drive may be in different positions than shown.
1
Connect the square end of the included USB cable to the USB port
on your external CD-R/RW drive.
2
Connect the flat end of the USB cable to the EXT. I/F connector on
the back of the TV.
3
Connect the power cable and adapter that came with the
CD-R/RW drive to the drive's power connector and to an
electrical outlet.
4
Turn on the CD-R/RW drive by flipping the power switch in back.
Connecting Other Equipment
See your TV User's Guide for details on connecting other equipment.
Your TV is equipped with a DVI (Digital Video Interface) connector
that lets you display pictures from a digital source (such as a satellite
receiver or DVD player) without signal loss. Use this connection to
obtain the best possible image. If your video equipment does not
support DVI, connect it to one of the ports shown here.
The connectors on the front of the TV also let you connect a PC or
game console, video camera, and headphones.
Installing the Printer Ink Cassette
1
Press and release the printer cover latch to open the cover.
2
Flip down the printer lock cover and turn the lock counterclockwise to loosen it. It spins freely when
it is unlocked.
3
Grasp the printer handle and pull the printer out as far as it goes.
4
Pull open the ink cover on the side of the printer.
Back of TV
HDTV tuner
OUTPUT SWITCH
RF IN
Antenna
cable
Back of TV
External
CD-R/RW
drive
Component
video (best)
S-video
(good)
Composite
video (fair)
Audio cable
L AUDIO R
Component
video cable
USB cable
continue
Advertisement
