Advertisement
Press DISPLAY to display or remove
the overlay.
Channel
Function
Status
\
Current
Time
[
•
";
•
=1_
12.)
Counter
Tape Speed
Whenever a blank section of a tape comes up in
Play mode, or when the selected channel has no
broadcast signal with the Weak Signal Display set
to "OFF" (see page 28), the screen will turn solid
blue.
When a function button is pressed (PLAY, FF, etc.)
or you change channels, the unit mode or channel
number will be displayed.
Warning
and Instruction
Displays
These displays will alert you to a missed
operation or provide further instructions.
PLEASE SET CLOCK BY
PRESSING ACTION KEY
If you attempt to set or review a Timer Recording, or
set the On-Timer and the Clock is not set...
If you press REC, and a cassette is inserted with no
3, 12
CHECK CASSETTE RECORD TAB
record tab,..
TO CANCEL TIMER REC HOLD
DOWN STOP KEY FOR APPROX 3
If you press STOP during a Timer Recording...
23
SEC
If you press PLAY, FF, REW, or REC without a
12
NO CASSETTE
cassette inserted...
PLEASE PREPARE FOR TIMER
If the unit is not in Stop mode or a cassette with
record tab is not inserted two minutes before a Timer
22 - 23
REC
Recording is about to begin...
VIDEO HEADS MAY NEED
CLEANING PLEASE INSERT HEAD
If head cleaning becomes necessary while playing
4
CLEANING CASSETTE OR REFER
back a tape.,.
TO MANUAL
END: PLAY
VCR LOCK ACTIVATED
28
If you press a function button other than STOP/EJECT or
POWER while the unit is in VCR Lock mode...
Advertisement
