Hitachi ED-D10N User Manual page 31

Item
TINT
SHARPNESS
MY MEMORY
Using the ◄/► cursor buttons adjusts the tint.
Reddish ó Greenish
• This item can be selected when input signals are video, s-video or
component video signals.
• When input signal is HDMI, this item can also be selected if either 1)
or 2) applies.
1) HDMI FORMAT is set to VIDEO.
2) HDMI FORMAT is set to AUTO, and the projector recognizes that
it receives video signals.
Using the ◄/► cursor buttons adjusts the sharpness.
Weak ó Strong
• There may be some noise and/or the screen may flicker for a
moment when an adjustment is made. This is not a malfunction.
This projector has 4 memories for adjustment data (for all the items
of the PICTURE menu).
Selecting a function using the ▲/▼ cursor buttons and pressing the
► cursor (or the ENTER) button performs each function.
SAVE-1 ó SAVE-2 ó SAVE-3 ó SAVE-4
LOAD-4 óLOAD-3 ó LOAD-2 ó LOAD-1
SAVE-1, SAVE-2, SAVE-3, SAVE-4
Performing a SAVE function saves the current adjustment data into
the memory linked in the number included in the function's name.
• Remember that the current data being stored of a memory will be
lost by saving new data into the memory.
LOAD-1, LOAD-2, LOAD-3, LOAD-4
Performing a LOAD function loads the data from the memory linked
in the number included in the function's name, and adjusts the
picture automatically depending on the data.
• The LOAD functions whose linked memory has no data are
skipped.
• Remember that the current adjusted condition will be lost by
loading data. If you want to keep the current adjustment, please
save it before performing a LOAD function.
• There may be some noise and the screen may flicker for a
moment when loading data. This is not malfunction.
• You can perform the LOAD function using the MY BUTTONs.
Please see the MY BUTTON item in the OPTION menu (49).
Description
PICTURE menu
31