Final Installation Check - LG DLHC6702 Series Owner's Manual

en-us_main.book.book Page 19 Monday, March 18, 2024 8:16 AM
Using a Standpipe to Drain
1
Clip the end of the hose into the elbow
bracket.
• Connect the elbow bracket
inches (10 cm) of the end of the drain hose.
If the drain hose is extended more than 4
inches (10 cm) beyond the end of the elbow
bracket, mold or microorganisms could
spread to the inside of the dryer.
2
Insert the end of the drain hose into the
standpipe.
3
Use the provided tie strap
drain hose in place.
Using the Laundry Tub to Drain
1
Clip the end of the hose into the elbow
bracket. Connect the drain hose holder to the
end of the hose so that the hose does not
come out.
• Connect the elbow bracket
inches (10 cm) of the end of the drain hose.
If the drain hose is extended more than 4
within 4
a
2
4 "
(10 cm)
3
to secure the
b

Final Installation Check

Once you have completed the installation of the
dryer and it is in its final location, confirm proper
operation with the following tests.
Checking Levelness
Once the dryer is in its final location, recheck the
dryer to be sure it is level. Make sure it is level front
to back and side to side, and that all four leveling
feet are in firm contact with the floor.
within 4
a
INSTALLATION
inches (10 cm) beyond the end of the elbow
bracket, mold or microorganisms could
spread to the inside of the dryer.
(10 cm)
Hang the end of the drain hose over the side
of the laundry tub.
Use the provided tie strap to secure the drain
hose in place.
19
4 "