LG DLHC6702 Series Owner's Manual page 40

en-us_main.book.book Page 40 Monday, March 18, 2024 8:16 AM
40 MAINTENANCE
Using Drum Care Feature
Run the Drum Care cycle periodically to prevent
unpleasant odors in the drum.
CAUTION
• Remove all of the clothes from the appliance.
1
Turn on the appliance.
2
Turn the knob to select the Drum Care cycle.
3
Press the Start/Pause button.
• This function operates for about 3 hours.
4
After the cycle finishes, open the dryer door
and leave it open to allow air to circulate in
the drum.
WARNING
• For safety reasons, do not allow children or
animals to climb into the appliance. Doing so
could cause damage or injury.
Using Condenser Care Feature
The appliance automatically cleans built-up lint off
of the condenser using water condensed from the
drying process. If needed, the condenser can also
be cleaned manually.
CAUTION
• Remove all of the clothes from the appliance.
1
Open the dryer door and pull out both the
inner and outer filters.
2
Carefully pour 34 oz. (1 liter) of clean water
into the lint filter compartment and then
reinsert both lint filters.
• Do not pour the water quickly as it will spill
out.
• Pouring more that 51 oz. (1.5 liters) of water
into the compartment will cause water to
leak out.
3
Turn on the appliance.
4
Turn the knob to select the Condenser Care
cycle using the Cycle List Edit option.
5
Press the Start/Pause button to start
cleaning the condenser.
• The condenser cleaning process takes
about 1 hour.
6
Open the dryer door after the cleaning is
finished and leave it open to allow air to
circulate and thoroughly dry the drum.
WARNING
• For safety reasons, do not allow children or
animals to climb into the appliance. Doing so
could cause damage or injury.
Cleaning the Condenser
Refer to the following instructions for manually
cleaning the condenser.
CAUTION
• To avoid physical injury and burns, do not touch
or clean the condenser with bare hands.
• When cleaning the condenser, be careful not to
damage the fins.
NOTE
• If drying performance deteriorates, open the
condenser cover to check for foreign
substances.
1
Press the top part of the access panel
open it.
to
a