en operation
12.4 Loading laundry
Note: To prevent creasing, take note
of the maximum load for the
→ "Programmes", Page 24.
Requirement: The laundry is pre-
pared.
→ "Laundry", Page 27
Open the door.
1.
Make sure that the drum is empty.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
12.5 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press
Start/Reload.
▶
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: "End".
12.6 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 27
¡ The "Ready in" time is set and ac-
tivated.
→ "Buttons", Page 22
Press
Start/Reload.
1.
The activated "Ready in" time is
paused.
28
Press
Ready In repeatedly until
2.
the display indicates the desired
"Ready in" time.
Press
Start/Reload.
3.
The changed "Ready in" time is ac-
tivated.
12.7 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Press
Start/Reload.
1.
The cooling process starts auto-
matically after approx. 30 seconds
and cools down the laundry while
the drum is rotating. If you want to
avoid or cancel the cooling pro-
cess, open the door.
→ "Display", Page 20
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press
Start/Reload.
5.
12.8 Cancelling the pro-
gramme
Press
Start/Reload.
1.
The cooling process starts auto-
matically after approx. 30 seconds
and cools down the laundry while
the drum is rotating. If you want to
avoid or cancel the cooling pro-
cess, open the door.
→ "Display", Page 20
Open the appliance door.
2.
Remove the laundry → Page 28.
3.
12.9 Unloading the laundry
Open the appliance door.
1.
Remove the laundry.
2.