Table of Contents
Advertisement
en Cleaning and servicing
Open the maintenance flap.
1.
If you place a cloth beneath the
maintenance flap, you can collect
the remaining water from the base
unit.
Open the lever for the heat ex-
2.
changer cover.
Pull out the heat exchanger cover
3.
by the handle.
36
Cleaning the base unit
You can remove any visible dirt in the
base unit.
CAUTION
Risk of cutting!
Touching sharp edges on the heat
exchanger may lead to cuts.
Do not touch the fins on the heat
▶
exchanger.
Open the base unit → Page 35.
1.
Use a soft brush to clean the heat
2.
exchanger cover.
Make sure that you remove all dirt
from the seal.
Carefully clean the fins on the heat
3.
exchanger with a vacuum cleaner
and brush attachment.
Ensure that you vacuum the fins
from top to bottom so that they do
not become deformed or dam-
aged.
Advertisement
Table of Contents
