Pioneer F227 Operating Instructions Manual page 8

OERATIONS
Preset station tuning
(1)Press STATION CALL switch @ into which the
desired station has been memorized.
¢ To listen to a Mode 1 broadcast, press the switch once, to listen
to a Mode 2 broadcast, press it twice, and to listen to Mode 3
broadcast, press it three times.
¢ By pressing STATION CALL switch @, the switch number will
be displayed, then the frequency will be displayed.
NOTE:
/f, for example, you wish to receive the station memorized in STATION
CALL switch "13" when listening to the station memorized in switch
"9", press switch "1/13/25" twice.
In this way, simple and accurate reception of any desired station is
possible.
STATION CALL switch ''memo"'
It is recommended that you make a note of the preset stations.
[scammer [>[ 4 [2] 2]
Name of broadcast
scawen [-[ 9] | |
Name of broadcast
SCawtcr [=] 28 [26
8
<ARE1157>
En
ee oaeaeie ee oe
20]
Seca
PFreauerey | | |.
a7 [se [s[ sla]
Name of broadcast
station
| Frequency [TT CE
NOTE:
© The contents of STATION CALL switches @ will be preserved for
several days, even if the power cord is unplugged.
© /f a preset station has been erased, reset it.
Last station memory
¢ When POWER switch (1) is pressed to turn power on, the last station
received before the power was previously turned off will be received
again.
e When power is ON, if BAND selector switch @ is pressed, the last
station received before BAND selector switch @ was previously
pressed will be received again.