CAUTION
Be sure to disconnect the AC power cord before installing a stand or wall mount brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or damaged by
hard objects or from pressure.
After the installation is completed, make sure the TV is steady on a table or firmly attached
to a wall mount, before removing all protective film, if any.
Installing the stand
Follow the illustrations and textual instructions below to complete the installation steps:
1. Carefully place your TV face-down (face-up for 75'' models) on a soft, flat surface to
prevent damage to the TV or scratching to the screen.
2. Take out the 2 stands from the accessory bag and then insert the stands into the bottom
slots of the TV.
3. Secure the stands to the TV with the 4 screws in accessory tightly.
50"/55"
65"
Installation
Base Stand
Screws:
M5×12
Base Stand
Base Stand
Base Stand
Screws:
M5×12
Screws:
M5×12
2
Screws:
M5×12