Advertisement
Wired setup
LAN (
Connect your TV to your network by connecting the LAN port on the back of your TV
to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the illustration
below.
· It is recommended to use a modem or router that supports Dynamic Host
Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS, so you don't
have to enter them manually. Most home networks already have DHCP.
TV JACK
LAN Cable
Wireless setup
To connect your TV to your network wirelessly, you need a wireless router or modem.
See the illustration below.
· The built-in Wireless LAN Adapter suppor ts the IEEE 802.11a/b/g/n/ac
communication protocols. It is recommended to use IEEE 802.11ac router. Low
transfer rates for b/g may have the influence on the quality of streamed videos and
other media.
NOTES
You must use the built-in Wireless LAN Adapter to use a wireless network because the set
doesn't support external USB network adapters.
If the wireless router supports DHCP, your TV can connect more easily to the wireless
network.
If you apply a security system other than the systems listed below, it will not work with the TV.
Security system: WPA, WEP, WPA2.
In order to guarantee smooth network, the distance between router and TV should be less
than 10 metres.
Making Connections
)
IP Sharer (Router)
(with DHCP server)
Wireless LAN Adapter
built-in TV set
External Modem
(ADSL / VDSL / Cable TV)
LAN Cable
9
Modem Cable
Wireless router with DHCP
LAN Cable
Advertisement
