Table of Contents
Advertisement
l\
Safety Precautions
When using the Monitor
Do not bring your hands, face or objects close to the ventilation holes of the Monitor.
• Top of Monitor is usually very hot due to high temperature exhaust air from ventilation holes. Burns or personal
injuries can happen if any body parts brought too close. Placing any object near the top of the display could also
result in heat damages to the object as well as to the Display due to its ventilation holes blocked.
Be sure to disconnect
all cables before moving the Monitor.
• Moving the Display with its cables attached might damage the cables which in turn can cause fire or electric shock.
Cleaning
and maintenance
The front of the display panel has been specially treated. Wipe the panel surface gently using only a soft, lint-
free cloth.
• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in water to which a small
amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the
surface is dry.
• Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with
volatile substances such as insect sprays, solvents and thinners, otherwise the quality of the surface may be
adversely affected.
If the cabinet becomes
dirty, wipe it with a soft, dry cloth.
• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added
and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.
• Do not allow any detergent to come into direct contact with the surface of the Monitor. If water droplets get inside the
unit, operating problems may result.
• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods
in contact with articles made from rubber or PVC.
Disconnect
the power plug from the wall outlet as a safety precaution
before carrying out any cleaning.
• Electric shocks can result if this is not done.
Clean the power cable regularly
to prevent it becoming
dusty.
• Built-up dust on power cord plug can increase humidity which might damage the insulation and cause fire. Unplug
the cord from wall outlet and clean it with a dry cloth.
Note:
If still pictures from sources such as video games or computers are projected for long periods, the image may become
burned into the Monitor panel (producing an "afterimage").
6
Advertisement
Table of Contents
