Table of Contents
Advertisement
Steps
1. Ensure that the securing clips are in an open position
2. Align the notch on the memory module with the tab on the memory-module slot.
3. Press down on the memory module until the memory module snaps into position and the securing clip locks in place
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components on the memory module.
NOTE:
Repeat step 1 to step 3 when installing more than one memory module in your computer.
Next steps
1. Install the fan.
2. Install the speaker.
3. Install the
side
cover.
4. Follow the procedure in
After working inside your
computer.
Removing and installing Customer Replaceable Units (CRUs)
55
Advertisement
Table of Contents
