Printing Without Margins To Match Roll Paper Width - Canon TM-355 Online Manual

Printing without Margins to Match Roll Paper Width

Procedure for printing borderless by enlarging/reducing documents to match roll paper width.
1. 1. Select the paper size for whole-surface borderless printing
Select "XXX Borderless" from Paper Size in the
2. 2. Select Page Processing from Printer Options
3. Select roll paper width 3.
For paper roll width, enter the same value set in the printer under Roll Paper Width.
4. 4. Select a method for printing on roll paper
In Fit Roll Paper Width, select On (Borderless).
5. 5. Complete setting process
Click Print.
If you print now, the document will be printed by filling in the entire surface of the paper.
Important
• If you want to print borderless using a custom paper size, create a custom paper size by choosing
Paper Size, Manage Custom Sizes..., and setting all Non-Printable Area values to 0 mm. Next,
choose Page Processing, Fit Roll Paper Width and select On (Borderless).
• If you try to set borderless printing, in Page Processing, Banner Printing and Print Centered will be
displayed in gray and you will not be able to configure them.
• Depending on paper size, the length/width ratio of the paper may be different from that of the image,
making it impossible for the whole image to fit on the paper.
When this happens, crop the image with the application software to match paper size.
• When printing borderless, printing may stop abruptly and the paper will be cut causing a slight color
unevenness on the edges of the paper. If you require particularly high quality, go to Automatic Cutting
under Advanced Paper Settings, and select None. When you do so, the document will be printed
without the left and right margins. After the printed material has exited the printer and has been cut, cut
the upper and lower edges with a pair of scissors.
print dialog.
119