Table of Contents
Advertisement
To open the hood, pull the release lever at
the bottom right of the instrument panel.
Now, the engine hood lock .is disengaged
half-way. Then, push the lever rearward
using a finger, as indicated in the photograph.
While pushing the lever, raise the engine
hood.
BRAKE PEDAL
Check the brake pedal for the distance
between the pedal and wall when the pedal
is pressed with approximately 30kg (66 lbs)
of force. The minimum distance required is
75mm (2.95 in).
NOTE:
Measure pedal-to-metal wall distance
in the pedal stroke direction. Be sure
not to include the mat or rubber on
the wall.
When the pedal distance needs adjusting,
have it done by your SUZUKI dealer. If the
following troubles are found in your brake
system, an inspection and repairs must be
immediately performed by your SUZUKI
dealer.
SELECTOR LEVER
Automatic transmission:
..
PYsh the selector button
when shifting the selector
lever in the range indicat-
ed by this arrow.
The selector lever can be
shifted
freely
without
pressing
the
selector:
button
in the range as
indicated by this arrow.
How to use selector positions
Park
Use this position when parking the car
or when starting the engine. Never
shift into
[EJ
position while the
vehicle is moving.
Reverse
Use this position when backing up.
Neutral
The engine can be started with the
selector lever in this position. (
[EJ
position is recommended for starting
the engine.)
Drive
Use this position for all normal driving.
[g
Low
Use this pos1t1on when driving on
steep upgrades, sandy beach, muddy
roads, snow-covered roads and when
requiring a strong engine-brake effect
on downgrades.
CAUTION: Do not use
[I]
position
at speeds in excess of 55 km/h. (34
miles).
Advertisement
Table of Contents
