Table of Contents
Advertisement
en Drying
Note: The oven light does not come on while the clean-
ing aid is running.
Requirement: The cooking compartment must have
cooled down completely.
Remove any accessories from the cooking compart-
1.
ment.
2.
ATTENTION!
Distilled water in the cooking compartment leads to
corrosion.
Do not use distilled water.
▶
Mix 0.4 litres water with a drop of washing-up liquid
and pour into the centre of the cooking compart-
ment floor.
Press "Cleaning" in the menu.
3.
Press
"Cleaning aid".
4.
The duration cannot be changed.
Press
.
5.
a A notification stating that you should carry out the
necessary preparatory work for the cleaning aid ap-
pears on the display.
Confirm the message.
6.
a The cleaning aid starts and the duration counts
down.
a Once the cleaning aid has ended, a signal tone
sounds. A message appears on the display confirm-
ing that the operation has finished.
Drying
18 Drying
To prevent residual moisture, dry the cooking compart-
ment following microwave-only operation and after us-
ing the cleaning aid.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
Do not use the appliance if there is water on the
▶
cooking compartment floor.
Wipe away any water on the cooking compartment
▶
floor before operation.
18.1 Drying the cooking compartment
You can leave the cooking compartment to dry or use
the drying function.
Allow the appliance to cool down.
1.
Remove any dirt from the cooking compartment.
2.
Wipe away any water in the cooking compartment.
3.
Dry the cooking compartment.
4.
To dry the cooking compartment, leave the appli-
‒
ance door open for 1 hour.
Appliance door
19 Appliance door
To clean the appliance door thoroughly, you can disas-
semble the appliance door.
24
Press
to switch the appliance off.
7.
8.
→ "Cleaning the cooking compartment after using
the cleaning aid", Page 24.
17.2 Cleaning the cooking compartment
after using the cleaning aid
ATTENTION!
The prolonged presence of moisture in the cooking
compartment leads to corrosion.
After using the cleaning assistance, wipe the cook-
▶
ing compartment and allow it to dry completely.
Allow the appliance to cool down.
1.
Wipe out the remaining water in the cooking com-
2.
partment using an absorbent sponge cloth.
Clean the smooth enamel surfaces in the cooking
3.
compartment with a dish cloth or a soft brush. Re-
move stubborn food remnants using a stainless
steel scouring pad.
Remove limescale with a cloth soaked in vinegar,
4.
and wipe this away with clean water.
Dry the cooking compartment with a soft cloth.
5.
To dry the cooking compartment completely, leave
6.
the appliance door open for approx. 1 hour or use
the drying function.
→ "Setting the drying process", Page 24
To use the drying function, set "Drying function".
‒
→ "Setting the drying process", Page 24
Setting the drying process
Requirement: → "Drying the cooking compartment",
Page 24
Press "Cleaning" in the menu.
1.
Press
"Drying function".
2.
The duration cannot be changed.
3.
Press
.
a A notification stating that you should carry out the
necessary preparatory work for the drying appears
on the display.
Confirm the message.
4.
a The drying process starts and the duration counts
down.
a Once the drying has ended, a signal tone sounds. A
message appears on the display confirming that the
operation has finished.
Press
to switch the appliance off.
5.
6.
To dry the cooking compartment completely, leave
the appliance door open for 1 to 2 minutes.
19.1 Detaching the door outer pane
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Advertisement
Table of Contents
