Table of Contents
Advertisement
Visibility parameters
Various parameters are offered/dis-
played when a programme is selected.
You can decide which parameters
should not be displayed. These para-
meters can then not be edited during
programme selection.
- Residual moisture
- Duration
- Gentle tumble
Drying levels Cottons
Drying level Minimum iron
You can alter the drying levels for the
Cottons and Minimum iron pro-
grammes.
Changing this setting leads to increased
energy consumption.
It can be set to one of 7 different levels.
Factory default: normal
Drying level Machine iron
The Machine iron drying level in the
Cottons programme can be individu-
ally adapted.
Changing this setting leads to increased
energy consumption.
You can change the residual moisture in
this programme to one of 11 levels from
16 % (more dry) to 26 % (more moist).
Factory default: 20 %
Supervisor level
Clean the airways
The tumble dryer's electronics calcu-
late the degree at which fluff or deter-
gent residue in the fluff filters and air
ducts are impairing performance. A
message to check the contamination
appears. You can decide at what level
of fluff this reminder should be emit-
ted.
You can adjust this reminder:
airways
- Off
The reminder does not appear. How-
ever, if there is a very severe blockage
in the ducting, the programme will be
cancelled and the reminder will ap-
pear in the display regardless of this
option.
- Heavy
The reminder only appears when
there is a heavy build-up of fluff.
- Factory default: normal
- Sensitive
The reminder appears when there is
only a small build-up of fluff.
Clean out
85
Advertisement
Table of Contents
