Contents Important �����������������������������������������������������������������������������������������1 Safety ..........................1 Electromagnetic fields (EMF) ..................2 Recycling ..........................2 Simplified EU declaration of conformity ..............2 Your 2-in-1 Air Purifier&Humidifier �������������������������������������������2 Product overview ......................3 Controls overview ......................4 Getting started �������������������������������������������������������������������������������5 Installing the humidification filter ................5 Installing the purification filter ..................5 Understanding Wi-Fi indicator ..................5 Using the 2-in-1 Air Purifier&Humidifier ...
Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance. If the supply cord is damaged, you must have it replaced by Philips, a service center authorized by • Philips, or similarly qualified persons in order to avoid a hazard.
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. The Philips 2-in-1 Air Purifier&Humidifier brings fresh, humidified air to your house for the health of your family.
It offers you advanced evaporation system with NanoCloud technology, using a special humidification filter which adds H₂O molecules to the dry air, and produces healthy humid air without formation of water mist. Its humidification filter retains bacteria, calcium and other particles from the water. It delivers only pure humidified air in your home.
*If Wi-Fi function is not used, the Wi-Fi indicator will be off automatically after 15 minutes. Setting up the Wi-Fi connection for the first time Download and install the Philips “Air+” app from the App Store or Google Play. Put the plug of the appliance in the power socket and tap to turn on the appliance.
Launch the “Air+” app and click on “Connect a New Device” or press the “+” button on the top of the screen. Follow the onscreen instructions to connect the appliance to your network. Note: • This instruction is only valid when the appliance is being set up for the first time. If the network has changed or the setup needs to be performed again, see Chapter “Reset the Wi-Fi connection”...
Understanding the air quality light The air quality light automatically goes on when the appliance is switched on, and lights up all colors in sequence. After approximately 30 seconds, the particle sensor selects the color that corresponds to the different working modes. The color of the air quality light is determined by the highest index among PM2.5 and IAI readings. 2-in-1 mode ( ): The color of the air quality light is determined by the humidity difference.
Turning on and off Note: • For optimum purification performance, close doors and windows. Keep curtains away from the air inlet or air outlet. • Put the plug of the appliance in the power socket. to switch on the appliance. The appliance beeps. »...
Setting target humidity Tap the button to set the target humidity level to 40%, 50%, 60% or ---. If you have not set a humidity level, the default target humidity is 50%. » When the ambient humidity reaches the target level, the appliance will automatically switch »...
Mode switch You can choose the Auto mode, Fan speed 1, Fan speed 2, Turbo mode, or Sleep mode by tapping the button. Fan speed 1&2 ( & ): In manual mode, the Auto mode ( ): The appliance automatically appliance operates on speed 1 or speed 2. adjusts the fan speed in accordance with the ambient air quality.
Using the light on/off function With the light sensor, the control panel can automatically turn on, turn off or dim according to the ambient light. The control panel will be off or dim when the ambient light is dark. You can touch any button to wake up all lights and check the air quality. Then, if no further operation, all lights will be off or dim again to match with the ambient light.
Cleaning schedule Frequency Cleaning method Wipe the plastic part of the appliance with a soft, dry cloth When necessary Clean the air outlet cover Clean the surface of the filter displays on the screen Cleaning the body of the appliance Regularly clean the inside and outside of the appliance to prevent dust from collecting. Wipe the fabric surface gently with a damp cloth.
Pull the back cover. Remove the filter from the appliance. Clean the surface of the filter with a vacuum cleaner. Put the filter back into the appliance. Reattach the back cover. Put the plug of the appliance in the power socket. Tap the button to switch on the appliance.
Replacing the purification filter Understanding the healthy protection lock This appliance is equipped with a filter replacement indicator to make sure that the air purification filter is in optimal condition when the appliance is operating. When the filter needs to be replaced, the filter replacement alert lights up red. If the filter is not replaced in time, the appliance will stop operating and automatically lock to protect the air quality in the room.
Always unplug the appliance before you replacing the filter. • Use only Philips original humidification filter FY3455. Replace the humidification filter every 6 months for optimal performance. If the filter is in good condition, you could use it for a longer period of time. Make sure to replace the humidification filter at least once a year.
Remove all packaging materials of the new filter. Put the new filter into the appliance. Install the top cover of the filter ( ), and then install the top cover of the water tank ( 6 Storage Turn off the appliance and unplug it from the power socket. Clean the appliance, humidification filter and the surface of the purification filter (see chapter “Cleaning and maintenance”).
Page 19
• This is normal. However, if the appliance produces a burnt smell even if removing filters, contact your Philips dealer or an authorized Philips service center. The filter may produce smell after being used for a while because of the absorption of indoor gases. It’s recommended that you reactivate the filter by putting it in ventilation place for repeated use.
Page 20
Problem Possible solution The appliance is extra • It’s normal if the appliance runs at the Turbo mode. loud. • In the Auto mode, if the appliance is too loud, maybe the appliance runs at high speed because air quality becomes worse, or your personalized setting in App triggers a higher fan speed.
Order parts or accessories If you have to replace a part or want to purchase an additional part, go to your Philips dealer or visit www.philips.com/support. If you have problems obtaining the parts, please contact the Philips Consumer Care Center in your...