Table of Contents
Advertisement
4
Remove all packaging materials of the new filter.
5
Put the new filter into the appliance.
6
Install the top cover of the filter (
6 Storage
1
Turn off the appliance and unplug it from the power socket.
2
Clean the appliance, humidification filter and the surface of the purification filter (see chapter
"Cleaning and maintenance").
3
Let all parts air dry thoroughly before storing.
4
Wrap the filters in air tight plastic bags.
5
Store the appliance, filters in a cool, dry location.
6
Always thoroughly wash your hands after handling the filters.
7 Troubleshooting
This chapter summarizes the most common problems you could encounter with the appliance. If you
are unable to solve the problem with that information below, contact the Consumer Care Center in
your country.
Problem
The appliance does
not work properly.
There is no air
humidification.
EN
16
1
), and then install the top cover of the water tank (
Possible solution
•
Check if the back cover is properly installed. If not, for safety reason, the
appliance will stop working.
The filter replacement alert has been on continuously but you have
•
not replaced the corresponding filter. As a result, the appliance is now
locked. In this case, replace the filter and tap and hold the
seconds to reset the filter lifetime counter.
•
Make sure that the water tank is filled with water and the water tank is
placed on the appliance correctly.
•
The advanced cold evaporation system in 2-in-1 air
humidification&purifier produces healthy moist air from the outlet
without any visible water mist. Water vapor is invisible to the human eye.
•
When used in a dry environment, the moisture released by the 2-in-1
humidification&purifier will be absorbed surrounding objects such
as walls and furniture, which can prolong the humidification time. To
achieve optimal humidification, it is recommended to close doors and
windows.
).
2
button for 3
Advertisement
Table of Contents
