Table of Contents
Advertisement
Put the power plug in the power socket.
2
Within 15 seconds after power on, touch and hold
3
3 seconds to reset the filter lifetime counter.
6 Storage
Turn off the air purifier and unplug from the power socket.
1
Clean the air purifier, particle sensor and the surface of the filter (see chapter
2
"Cleaning and maintenance").
Let all parts air dry thoroughly before storing.
3
Wrap the filter in air tight plastic bags.
4
Store the air purifier, filter in a cool, dry location.
5
Always thoroughly wash hands after handling the filter.
6
7 Troubleshooting
This chapter summarizes the most common problems you could encounter with
the appliance. If you are unable to solve the problem with the information below,
contact the Consumer Care Center in your country.
Problem
The appliance does
not work properly.
The airflow that
comes out of
the air outlet
is significantly
weaker than
before.
Possible solution
The filter replacement alert has been on continuously
•
but you have not replaced the corresponding filter. As a
result, the appliance is now locked. In this case, replace the
filter and long touch
counter.
The surface of the filter is dirty. Clean the surface of the
•
filter (see the chapter "Cleaning and maintenance").
and
and
to reset the filter lifetime
button for
EN
15
Advertisement
Table of Contents
