Related Manuals for D-Link DAP-X3060
Summary of Contents for D-Link DAP-X3060
- Page 1 Version 1.00 | 11/30/2023 User Manual Nuclias Connect AX3000 Access Point DAP-X3060...
-
Page 2: Table Of Contents
Wi-Fi Protected Access (WPA / WPA2 / WPA3) ..18 Static Pool Setting ............55 LAN ..................20 Current IP Mapping List ..........57 IPv6 ..................21 Filters ..................58 Advanced Settings ..............22 Wireless MAC ACL ............58 Performance .................23 Wireless Resource ...............25 D-Link DAP-X3060 User Manual... - Page 3 Administration ..............75 Limit Administrator ............75 System Name Settings ..........76 Login Settings ..............76 Console Settings ............76 Ping Control Setting ............77 LED Settings ..............77 DDP Setting ..............77 Country Setting .............77 Nuclias Connect Settings ...........78 Firmware and SSL Upload ..........79 D-Link DAP-X3060 User Manual...
-
Page 4: Nuclias Connect
Nuclias Connect Introduction Nuclias Connect is D-Link’s centralized management solution for Small-to-Medium-Sized Business (SMB) networks. Nuclias Connect makes it easier to analyze, automate, configure, optimize, scale, and secure your network — delivering the convenience of an Enterprise-wide management solution, at an SMB price. Nuclias Connect gives you the financial and technical flexibility to expand from a small network to a larger one of up to 1,000 Access Points (APs), while retaining a robust and centralized management system. -
Page 5: Nuclias Connect Key Features
Intuitive Interface • Multi-Tenant & Role-Based Administration • Payment Gateway (PayPal) Integration and Front-Desk Ticket Management For more information on how to use Nuclias Connect with the DAP-X3060, please refer to the Nuclias Connect User Guide. D-Link DAP-X3060 User Manual... -
Page 6: Package Contents
• Ceiling Brackets • Quick Start Guide Note: No PSU supplied. To power the units use a D-Link 802.3at PoE switch or the D-Link DPE-301GI PoE injector. System Requirements y Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet Adapter... -
Page 7: Hardware Overview
This LED will blink during boot-up. Connect to a Power over Ethernet (PoE) switch or router via LAN (PoE) Port an Ethernet cable. Indicates that the DAP-X3060 is working Solid Green properly. Connect the supplied power adapter. (*Note: no longer... -
Page 8: Basic Installation
To power on the DAP-X3060, you can use ONE of the following methods: 1. Plug one end of your Ethernet cable into theLAN(PoE) port of the DAP-X3060, and the other end into a port on a 802.3at PoE switch. 2. Purchase a DPE-301GI PoE injector separately if you need to connect the access point without a 802.3at PoE Switch. -
Page 9: Setup Wizard
Month, Week, Day, Hour, and Minute of the DST starting days. Once the settings are configured, click Update button to accept the configuration and proceed to the main interface menu page. DAP-X3060 D-Link DAP-X3060 User Manual... -
Page 10: Web User Interface
Web User Interface The DAP-X3060 supports an elaborate web user interface where the user can configure and monitor the device. Launch a web browser, type dapx3060.local in the address field and then press Enter to login. Most of the configurable settings are located in the left menu of the web GUI which contains sections called Basic Settings, Advanced Settings and Status. -
Page 11: Wireless
The channel selection process only occurs when the AP is booting up. To manually select a channel, set this option to Disable and select a channel from the drop-down menu. D-Link DAP-X3060 User Manual... - Page 12 2. Two SSIDs will be occupied when using Enhanced Open + Open D-Link DAP-X3060 User Manual...
-
Page 13: Wds With Ap Mode
Channel Width: Allows you to select the channel width you would like to operate in 2.4GHz and 5GHz. Use the drop- down menu to choose 20 MHz or Auto 20/40 MHz or Auto 20/40/80 MHz. D-Link DAP-X3060 User Manual... - Page 14 • Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. Note: It is highly recommended that you use WAP-Personal to encrypt your network. Note: It is highly recommended that you use WPA-Personal to encrypt your network. D-Link DAP-X3060 User Manual...
-
Page 15: Wds Mode
20 MHz or Auto 20/40 MHz or Auto 20/40/80 MHz. AP MAC Address: Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks. D-Link DAP-X3060 User Manual... - Page 16 Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. Note: It is highly recommended that you use WAP-Personal to encrypt your network Note: It is highly recommended that you use WPA-Personal to encrypt your network. D-Link DAP-X3060 User Manual...
-
Page 17: Wireless Security
Key Index drop-down menu. **Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F. *ASCII (American Standard Code for Information Interchange) is a code that represents English letters using numbers ranging from 0-127. D-Link DAP-X3060 User Manual... -
Page 18: Wi-Fi Protected Access (Wpa / Wpa2 / Wpa3)
AUTO, AES, or TKIP from the drop-down menu. Group Key Update: Select the interval during which the group key will be valid. The default value of 3600 is recommended. Pass Phrase: When you select WPA-Personal, enter a Pass Phrase in the corresponding field. D-Link DAP-X3060 User Manual... - Page 19 Accounting Server: Enter the IP address of the accounting server. Accounting Port: Enter the accounting port. Accounting Secret: Enter the accounting secret. Save: Save the updated configuration. Click Configuration > Save and Activate to make changes permanent. D-Link DAP-X3060 User Manual...
-
Page 20: Lan
Section 3 - Configuration LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-X3060. These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. -
Page 21: Ipv6
Check to enable IPv6 Get IP From: Dynamic IP is chosen here. Choose this option the DAP-X3060 can get IPv6 address automatically or use Static to set IPv6 address manually. When Auto is selected, the other fields here will be grayed out. -
Page 22: Advanced Settings
In the Advanced Settings Section the user can configure advanced settings concerning Performance, Wireless Resource, Multi-SSID, VLAN, Intrusion, Schedule, Internal RADIUS Server, ARP Spoofing Prevention, Bandwidth Optimization, Captive Portal, DHCP Server, Filters and Traffic Control . The following pages will explain settings found in the Advanced Settings section in more detail. D-Link DAP-X3060 User Manual... -
Page 23: Performance
DTM Interval (1-15): Select a Delivery Traffic Indication Message setting between 1 and 15. 1 is the default setting. DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. D-Link DAP-X3060 User Manual... - Page 24 Access Point will automatically change to 20 MHz. Transfer DHCP Offer to Enable to transfer the DHCP Offer to Unicast from LAN to WLAN. It is suggested to enable this function if stations number is larger Unicast: than 30. D-Link DAP-X3060 User Manual...
-
Page 25: Wireless Resource
AP exceeds the percentage that has been specified, the DAP-X3060 will not allow clients to associate with the AP. User Limit (0 - 128): This function is only available when Connection Limit is enabled. - Page 26 Network Utilization: Click the drop-down menu to set the maximum utilization of this access point for service. The DAP-X3060 will not allow any new clients to associate with the AP if the utilization exceeds the value the user specifies. When this network utilization threshold is reached, the device will pause for one minute to allow network congestion to dissipate.
-
Page 27: Multi-Ssid
Note: It is highly recommended that you encrypt your network for all SSIDs in Multi-SSID configuration. Priority: Select the priority level of the SSID selected. WMM (Wi-Fi WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applications over a Wi-Fi Multimedia): network. D-Link DAP-X3060 User Manual... - Page 28 RADIUS Secret. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. Accounting Mode: Click the drop-down menu to enable or disable the accounting mode. Enter the IP address of the accounting server. Accounting Server: D-Link DAP-X3060 User Manual...
-
Page 29: Vlan
The DAP-X3060 supports VLANs. VLANs can be created with a Name and VID. Mgmt (TCP stack), LAN, Primary/Multiple SSID, and WDS connection can be assigned to VLANs as they are physical ports. Any packet which enters the DAP-X3060 without a VLAN tag will have a VLAN tag inserted with a PVID. -
Page 30: Port List
The name of the port is displayed in this column. Tag VID: The Tagged VID is displayed in this column. Untag VID: The Untagged VID is displayed in this column. PVID: The Port VLAN Identifier is displayed in this column. D-Link DAP-X3060 User Manual... -
Page 31: Add/Edit Vlan
Provide a number between 1 and 4094 for the Internal VLAN. VLAN Name: Enter the VLAN to add or modify. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual... -
Page 32: Pvid Settings
Click the Save button to let your changes take effect. VLAN Status: Use the radio button to toggle between Enable and Disable. VLAN Mode: Displays the current VLAN mode. PVID Auto Assign Status: Use the radio button to toggle PVID auto assign status to Enable. D-Link DAP-X3060 User Manual... -
Page 33: Intrusion
AP. Alternatively, click the radio button to mark all new access points as valid or rogue. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual... -
Page 34: Schedule
Check this box to have your settings apply 24 hours a day. Start Time: Enter the beginning hour and minute, using a 24-hour clock. End Time: Enter the ending hour and minute, using a 24-hour clock. D-Link DAP-X3060 User Manual... -
Page 35: Internal Radius Server
Internal RADIUS Server The DAP-X3060 features a built-in RADIUS server. Once you have finished adding a RADIUS account, click the Save button to let your changes take effect. The newly-created account will appear in this RADIUS Account List. The radio buttons allow the user to enable or disable the RADIUS account. -
Page 36: Arp Spoofing Prevention
Click to delete all gateway entries. Edit: Click to edit the selected gateway entry. Delete: Click to delete the gateway entry. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual... -
Page 37: Bandwidth Optimization
Use the drop-down menu to select the type that is applied to the rule. Available options are: Allocate average BW for each station, Allocate maximum BW for each station, Allocate different BW for 1a/b/g/n stations, and Allocte specific BW for SSID. D-Link DAP-X3060 User Manual... - Page 38 Click to remove the settings from the menu interface. Edit: Click to edit the selected gateway entry. Delete: Click to delete the gateway entry. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual...
-
Page 39: Captive Portal
URL of the website that will be used in the space provided. IPIF Status: Select to Enable or Disable the Captive Portal with its IP interface feature here. VLAN Group: Enter the VLAN Group ID here. Get IP From: D-Link DAP-X3060 User Manual... - Page 40 DHCP server in your network, or if you wish to assign a static IP address to the DAP-X3060. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made.
-
Page 41: Authentication Settings- Username/Password
URL of the website that will be used in the space provided. Select to Enable or Disable the Captive Portal IPIF Status: with its IP interface feature here. Enter the VLAN Group ID here. VLAN Group: D-Link DAP-X3060 User Manual... - Page 42 DHCP server in your network, or if you wish to assign a static IP address to the DAP-X3060. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made.
-
Page 43: Authentication Settings- Passcode
URL of the website that will be used in the space provided. IPIF Status: Select to Enable or Disable the Captive Portal with its IP interface feature here. VLAN Group: Enter the VLAN Group ID here. D-Link DAP-X3060 User Manual... - Page 44 DHCP server in your network, or if you wish to assign a static IP address to the DAP-X3060. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made.
- Page 45 Click to delete all passcode setting entries Edit: Click to edit the selected entry. Delete: Click to delete the entry. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual...
-
Page 46: Authentication Settings- Remote Radius
URL of the website that will be used in the space provided. IPIF Status: Select to Enable or Disable the Captive Portal with its IP interface feature here. VLAN Group: Enter the VLAN Group ID here. D-Link DAP-X3060 User Manual... - Page 47 DHCP server in your network, or if you wish to assign a static IP address to the DAP-X3060. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made.
-
Page 48: Authentication Settings- Ldap
DHCP server in your network, or if you wish to assign a static IP address to the DAP-X3060. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made. - Page 49 Edit: Click to edit the selected entry. Delete: Click to delete the entry. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual...
-
Page 50: Authentication Settings- Pop3
URL of the website that will be used in the space provided. IPIF Status: Select to Enable or Disable the Captive Portal with its IP interface feature here. VLAN Group: Enter the VLAN Group ID here. D-Link DAP-X3060 User Manual... - Page 51 DHCP server in your network, or if you wish to assign a static IP address to the DAP-X3060. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made.
-
Page 52: Login Page Upload
Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual... -
Page 53: Mac Bypass
Section 3 - Configuration MAC Bypass The DAP-X3060 features a wireless MAC Bypass. Once finished editing these settings, click the Save button to let the changes take effect. Wireless Band: Select the wireless band for MAC Bypass. SSID Index: Select the SSID for MAC Bypass. -
Page 54: Dhcp Server
The DHCP address pool defines the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless stations to receive an available IP with lease time control. If needed or required in the network, the DAP-X3060 is capable of acting as a DHCP server. -
Page 55: Static Pool Setting
IP addresses automatically without the need to manually assign IP addresses. Select Enable to allow the DAP-X3060 to function as a DHCP server. Assigned IP: Use the Static Pool Settings to assign the same IP address to a device every time you start up. - Page 56 Enter the DNS server address for your wireless network. Domain Name: Specify the domain name for the network. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual...
-
Page 57: Current Ip Mapping List
IP address from the DHCP dynamic pool. Assigned IP Address: The current corresponding DHCP-assigned static IP address of the device. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual... -
Page 58: Filters
Load MAC File to Local To download the ACL list, click Download and to save the ACL list. Hard Driver: Click to save the updated configuration. To make the updates Save: permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual... -
Page 59: Wlan Partition
Multi-SSID. In Guest mode, wireless stations cannot exchange data with any station on your network. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual... -
Page 60: Ip Filter Settings
Download IP Filter File: To download the IP Filter list file, click Download and to save the IP filter list. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual... -
Page 61: Traffic Control
Downlink Bandwidth: The downlink bandwidth in Mbits per second. Uplink Bandwidth: The uplink bandwidth in Mbits per second. Click to save the updated configuration. Save: To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual... -
Page 62: Qos
Section 3 - Configuration Quality of Service (QoS) enhances the experience of using a network by prioritizing the traffic of different applications. The DAP-X3060 supports four priority levels. Once the desired QoS settings are finished, click the Save button to let your changes take effect. -
Page 63: Traffic Manager
Enter the downlink speed in Mbits per second. Uplink Speed: Enter the uplink speed in Mbits per second. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual... -
Page 64: Status
In the Status Section the user can monitor and view the configuration settings of the access point. Here the user can also view statistics about client information, WDS information and more. The following pages will explain settings found in the Status section in more detail. D-Link DAP-X3060 User Manual... -
Page 65: Device Information
This page displays information like firmware version, Ethernet and wireless parameters, as well as the information regarding CPU and memory utilization. Device Information: This read-only window displays the configuration settings of the DAP-X3060, including the firmware version and the device’s MAC address. D-Link DAP-X3060 User Manual... -
Page 66: Client Information
Section 3 - Configuration Client Information This page displays the associated client’s SSID, MAC, band, authentication method, signal strength, and power saving mode for the DAP-X3060 network. Client Information: This window displays the wireless client information for clients currently connected to the DAP-X3060. -
Page 67: Wds Information Page
Section 3 - Configuration WDS Information Page This page displays the access point’s SSID, MAC, band, authentication method, signal strength, and status for the DAP-X3060’s Wireless Distribution System network. WDS Information: This window displays the Wireless Distribution System information for clients currently connected to the DAP-X3060. -
Page 68: Channel Analyze
Section 3 - Configuration Channel Analyze Wireless Band: Select either 2.4Ghz or 5GHz. Detect: Click the Detect button to scan. AP List: This will list the transmitting channels and quality. D-Link DAP-X3060 User Manual... -
Page 69: Statistics
Section 3 - Configuration Statistics Ethernet Traffic Statistics Displays wired interface network traffic information. Ethernet Traffic Statistics: This page displays transmitted and received count statistics for packets and bytes. D-Link DAP-X3060 User Manual... -
Page 70: Wlan Traffic Statistics
Section 3 - Configuration WLAN Traffic Statistics Displays throughput, transmitted frame, received frame, and error information for the AP network. WLAN Traffic Statistics: This page displays wireless network statistics for data throughput, transmitted and received frames, and frame errors. D-Link DAP-X3060 User Manual... -
Page 71: Log
The log information includes but is not limited to the following items: cold start AP, upgrading firmware, client association with APs, and web login. The web page holds up to 500 logs. D-Link DAP-X3060 User Manual... -
Page 72: Log Settings
Log Server/IP Address: Enter the IP address of the server you would like to send the DAP-X3060 log to. Log Type: Check the box for the type of activity you want to log. There are three types: System Activity, Wireless Activity, and Notice. - Page 73 Retype the password entry to confirm the password. E-mail Log Schedule: Use the drop-down menu to set the email log schedule. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X3060 User Manual...
-
Page 74: Maintenance Section
In the Status Section the user can monitor and view configuration settings of the access point. Here the user can also view statistics about client information, WDS information and more. The following pages will explain settings found in the maintenance section in more detail. D-Link DAP-X3060 User Manual... -
Page 75: Administration
Limit Administrator IP: Check to enable the Limit Administrator IP address. IP Range: Enter the IP address range that the administrator will be allowed to log in from and then click the Add button. D-Link DAP-X3060 User Manual... -
Page 76: System Name Settings
Status is enabled by default. Uncheck the box to disable the console. Console Protocol: Select the type of protocol you would like to use, Telnet or SSH. Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never. Time-out: D-Link DAP-X3060 User Manual... -
Page 77: Ping Control Setting
Each of the eight main categories display various hidden administrator parameters and settings. Status is enabled by default. Uncheck the box to disable DDP control. Country Setting Select a Country: Choose from drop down list country where device is located. D-Link DAP-X3060 User Manual... -
Page 78: Nuclias Connect Settings
Enable Nuclias Connect: Click the drop-down menu to enable or disable Nuclias Connect. Note: To save the new configuration settings to the firmware, click Configuration > Save and Activate, otherwise click Discard Changes to delete any setting change. D-Link DAP-X3060 User Manual... -
Page 79: Firmware And Ssl Upload
This page allows the user to perform a firmware upgrade. This upgrades the software running on the hardware used by the access point. This is a useful feature that prevents future bugs and allows for new features to be added to this product. Please go to your local D-Link website to see if there is a newer version firmware available. -
Page 80: Configuration File Upload
File: Browse to the saved Nuclias Connect Upload Nuclias Connect Network file you have in your local drive Network File : and click “Open” and “Upload” to upload the Nuclias Connect Network file . D-Link DAP-X3060 User Manual... -
Page 81: Time And Date Settings
A user can either manually set the time Time Manually: for the AP here, or click the Copy Your Computer’s Time Settings button to copy the time from the computer in use (Make sure that the computer’s time is set correctly). D-Link DAP-X3060 User Manual... -
Page 82: Configuration And System
Help allows the user to read more about the given options to configure without the need to consult the manual. The following pages will explain settings found in the configuration and system section in more detail. DAP-X3060 D-Link DAP-X3060 User Manual... -
Page 83: System Settings
On this page the user can restart the unit, perform a factory reset of the access point or clear the added language pack. Restart the Device: Click Restart to restart the DAP-X3060. Restore to Factory Default Click Restore to restore the DAP-X3060 Settings: back to factory default settings. -
Page 84: Help
Help The help page is useful to view a brief description of a function available on the access point in case the manual is not present. Help: Scroll down the Help page for topics and explanations. D-Link DAP-X3060 User Manual... -
Page 85: Technical Specifications
WEP™ 64-/128-bit • L = 190 mm Wireless Frequency Range • W = 190mm • 2.4 to 2.4835 GHz and 5.15 to 5.85 GHz • H = 42.8 mm Operating Voltage • 12V/2.5A or 802.3at PoE D-Link DAP-X3060 User Manual... -
Page 86: Antenna Pattern
Appendix B - Antenna Pattern Antenna Pattern Antenna Pattern Orientation H-Plane E-Plane 2.4 GHz Wall Mounted Floor (H-Plane) 5 GHz Wall Mounted Floor (H-Plane) D-Link DAP-X3060 User Manual... - Page 87 Appendix B - Antenna Pattern Antenna Pattern Orientation H-Plane E-Plane 2.4 GHz Ceiling Mounted Ceiling (E-Plane) Floor (H-Plane) 5 GHz Ceiling Mounted Ceiling (E-Plane) Floor (H-Plane) D-Link DAP-X3060 User Manual...
-
Page 88: Regulatory Statements
The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. RF Frequency Requirements D-Link DAP-X3060 User Manual... - Page 89 This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0.2 m between the radiator and your body. Déclaration d’exposition aux radiations D-Link DAP-X3060 User Manual...
- Page 90 Install and use the equipment according to the instruction manual. 電波法により5GHz帯は屋内使用に限ります。 Product and Warranty Information To find out more about D-Link Nuclias product or marketing information, please visit the website http://www.dlink.com or https://www.nuclias. com. The D-Link Limited Lifetime Warranty information is available at http://www.dlink.com/warranty...
-
Page 91: Power Usage
Power Usage This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. Network Standby: 6.6 watts D-Link DAP-X3060 User Manual...