Table of Contents
Advertisement
If you do not know the channel number:
(Press ( ) button. Move onto the settings
m e n u by pressing the right movement
( ) button. You may directly access this
menu by pressing the Blue button
When you select the installation tab by
pressing the buttons (
the button (
visualized on the screen. Select the
program in which you would like to perform
an Installation using the right-left direction
buttons ( )/( ) or numerical buttons.
Select the system in which you would like
to make the search from among the
system tabs. Enter the System tab by
pressing the down button (
Here, your television can be set to a single
system and you can also select from
among more than one systems via the
(
)/(
) buttons. (option) Move from here to the
band tab via the downward movement button (
Pressing the right-left movement buttons ( )/( )
on your remote control, select the "S" for cable
channels and "C" for broadcasts received via the
aerial. Select the search tab via the downward
movement button (
ascending order with the Right direction button ( )
and in descending order with the left direction button
( ) . If the channel that has been found is of your
desired quality, then select the storing tab.
Afterwards, store it in the memory by pressing the
button (
) . Repeat the same procedure also for
the other channels by selecting the program number
of your choice from among the program no. tab.
If there is need to perform Manual Fine Tuning on
the current channel or to name the current channel,
refer to the related parts.
)/(
) and press
) , a setup menu will be
) below.
) , scan the channels in
Fine Tuning
If the current channel requires Fine Tuning,
then select the fine tuning tab by using
the downward movement button (
the Installation menu. Using the right-left
.
( )
movement ( )/( ) buttons on your remote
control you will have the ability to get the
exact quality of tuning required. Under
normal circumstances, you will not feel
the need to use the Fine Tuning function.
The AFC values of your television will
automatically adjust and lock themselves
to the channel. However, you might need
it in case the television transmitters do
not operate according to the standards.
To store in the memory the settings you have made,
select the Store option and press the button (
Program no
System
Channel
) .
Band
Search
Fine tuning
Store
-19-
INSTALLATION
23
B/G
17
S
0
MENU :Cancel
TV :Exit
) in
) .
Advertisement
Table of Contents
