Dialling And Answering; Power On/Off; Dialling; Dialling Directly - Haier C1000 Manual

Hide thumbs Also See for C1000:

Table of Contents

2.DIALLING AND ANSWERING

After setting up your phone, you can dial and answer calls. This Section provides a basic

overview for reference purposes.

Press and hold

to turn on the phone; and a power on display will flash on-screen.

If phone requests PIN code entry, input it to continue. (Refer to Section1.2.3)

Pressing and holding

again will turn off the phone.

When the logo of the network service provider shows on-screen, your phone is in standby state

and you can dial and answer calls. The icon in the top left corner displays the strength of the

signal received by the phone and current signal strength is indicated by the number of bars on

the screen (5 bars maximum). Call quality may be weakened by obstacles. Changing the

direction of the phone may enhance signal strength.

There are many ways to make a call in standby state, e.g. dialling directly, dialling from your

contacts, speed dialling, or dialling by location.

Table of Contents