D-Link DWL-G700AP Manual page 15

Using the Configuration Utility (continued)
New Password:
new password.
Confirm Password:
Re-enter the password to
confirm it.
Save Settings:
system settings can be saved
as a file onto the local hard
drive.
Load Settings:
The saved file
or any other saved setting file
can be loaded back on the access
point. To reload a system settings
file, click on Browse
the local hard drive and locate
the system file to be used. Click
Load when you have selected
the file to be loaded back onto
the access point.
Restore:
You may also reset
the DWL-G700AP back to factory settings by clicking on Restore. Make sure to save
the unit's settings before clicking on Restore. You will lose your current settings when
you click Restore.
Tools > Admin
Enter the
Tools > System
The current
to browse
15