D-Link DFE-2600 User Manual page 116

Dual-Speed Stackable Hub Web-based Management User's Guide
Rising Threshold
current sampled value is greater than or equal to this threshold, and the
value at the last sampling interval was less than this threshold, a single
event will be generated. After a rising event is generated, another such
event will not be generated until the sampled value falls below this
threshold and reaches the Alarm Falling Threshold.
Falling Threshold
current sampled value is less than or equal to this threshold, and the val-
ue at the last sampling interval was greater than this threshold, a single
event will be generated. After a falling event is generated, another such
event will not be generated until the sampled value rises above this
threshold and reaches the Alarm Rising Threshold.
Rising Index
crossed. The number identified by a particular value of this index should
be the same as the Event index number identified in the Event group. If
there is no corresponding entry in the Event Table, then no association
exists. In particular, if this value is zero, no associated event will be
generated, as zero is not a valid event index number.
Falling Index
threshold is crossed. The number identified by a particular value of this
index should be the same as the Event index number identified in the
Event group. If there is no corresponding entry in the Event Table, then
no association exists. In particular, if this value is zero, no associated
event will be generated, as zero is not a valid event index number.
To use the Alarm Group, at least one entry must be present in the Alarm Ta-
ble to define threshold parameters. Entries may be added to the Alarm Table
by filling in the boxes in the lower half of the Alarm window shown below.
104
A threshold for the sampled statistic. When the
A threshold for the sampled statistic. When the
The index number that is used when a rising threshold is
The index number that is used when a falling
Web-based Network Management