Acer HDS AMS200 Reference Manual page 144

This chapter provides information on the Fibre, NAS, and iSCSI models. The following table
illustrates sections that provide an explanation for each model.
Fibre model: Connects disk array subsystem to a host computer with Fibre Channel
interface.
NAS model: Connects NAS Unit connected to disk array subsystem to a host computer
with LAN interface.
iSCSI model: Connects disk array subsystem to a host computer with iSCSI interface.
Sections
7.1 7.1.1 Microprogram
7.1.2 System Parameters
7.1.3 Configuration Information
7.1.4 SNMP Information
7.1.5 Storage for Parameters
7.2 Setting Fibre Channel Information
7.3 Setting iSCSI
7.4 7.4.1 Setting a Spare Disk
7.4.2 Canceling a Spare Disk Setting
7.4.3 Setting a RAID Group
7.4.4 Deleting a RAID Group
7.4.5 Setting a Logical Unit
7.4.6 Deleting the Last Logical Unit
7.4.7 Formatting a Logical Unit
7.4.8 Changing the Format Mode
7.4.9 Changing the Default Controller in Charge of an LU
7.5 7.5.1 Setting Mapping Information
7.6 7.6.1 Setting Mapping Information
7.7 Setting CHAP authentication information
7.8 Transferring Configuration
7.9 Storing Configuration Data
7.10 Applying Configuration Data to Another AMS 200 Subsystem
7.11 7.11.1 Simple Setting
7.11.2 Detailed Setting for Each Host Connection
7.12 Setting the Subsystem When Using Special Mode
7.13 Changing the Network Parameter
7.14 Changing the IP Address for the Maintenance Port
7.15 Setting the System LU and User LU in the NAS System
7.16 Setting the NNC Management LAN Port Information in the NAS System
7.17 Setting Time Zone
: The explanation is provided.
—: The explanation is not provided.
124 Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem
Fibre NAS iSCSI
− −
− −
− −
− −
− −
−
−
− −
− −