Precautions For Using Equipment - Acer HDS AMS200 Reference Manual

2.2.3

Precautions for Using Equipment

Use special precautions for the following:
Equipment
Cables
Air vents
Battery unit
Nickel-Hydride rechargeable battery instructions
Miscellaneous and other
2.2.3.1 Equipment
If you notice unusual heat generation, odors, or smoke emission, shut off the power feed
to the equipment and contact the Customer Engineer. Leaving such conditions
unattended may result in hazardous physical conditions and equipment failure.
Avoid physical disruption to the equipment. This may result in hazardous physical
conditions and equipment failure.
Do not place heavy objects on top of the disk array. Avoid using the equipment for any
use other than its original purpose; otherwise, an injury or equipment failure may result.
2.2.3.2 Cables
Avoid obstructing walkways when routing cables.
Do not allow heavy material to be placed on cables. Do not place cables near any
apparatus that generates heat. Do not step on or subject cables or connectors to
shearing or pulling forces; the cable jacket can be damaged and can break, resulting in
an electric shock, fire, or loss of data.
Make sure that electrical and signal cables are clean before connecting them. Any dirt
on a connector should be removed before inserting the connector into a socket.
2.2.3.3 Air Vents
Make certain that the air vents are free of obstruction. They should be inspected
periodically.
Do not place metallic material such as paper clips or any combustible material such as
paper into or near the air vents. This may result in electric shock or fire.
14 Chapter 2 Planning for Installation and Operation