Motorola RAZR MAXX V6 Manual page 42

9.4.1
9.4.1 Setting Up a Cable Connection
Attach a Motorola Original™ USB cable to the phone and
external device as follows.
Note: Check your computer or hand-held device to determine
the type of cable you need.
Action
1 Plug the end of
the cable with
the Motorola
logo into the
phone's
accessory
connector port.
Make sure that
the logo and the phone are both facing you.
2 Plug the other end (the USB connection) into the USB
port on the device.
9.4.2 Setting Up a Wireless Connection
Your phone supports Bluetooth
called linking or bonding). You can pair your phone with a
42 Using and Transferring Files
TM wireless pairing (also
Setting Up a Cable Connection
Bluetooth headset or car kit, or pair your phone with a
computer to exchange and synchronise files.
Note: The use of wireless devices and their accessories may
be prohibited or restricted in certain areas. Always obey the
laws and regulations on the use of these products.
Turning Bluetooth Power On or Off
Find the Feature
If Bluetooth Power is On, your phone can automatically pair
with the handsfree device you have used before. Just turn on
the device or move it near the phone.
Once you connect your phone to a Bluetooth device, your
phone "recognises" that device in the future. If a recognised
device starts a Bluetooth link with your phone, the Bluetooth
status icon appears at the top of your display.
Note: To extend battery life, use the above procedure and set
Bluetooth Power to Off when not in use. Your phone will not
pair with devices until you set Bluetooth Power back to On and
pair your phone with the devices again.
s
> Connectivity > Bluetooth
> Setup > Power > On