Using The Scan Key (For Usb Cable Users) - Brother DCP-8080DN Software User's Manual

Using the Scan key (For USB cable users)

Note
If you use Scan on a network, see Using the Scan key on page 201.
You can use (Scan) on the control panel to scan documents directly into your word processing,
graphics or E-mail applications or to a folder on your Macintosh
Before you can use
and connect the machine to your Macintosh
then the correct drivers and ControlCenter2 are installed. Scanning by
configuration on the ControlCenter2 tab. (See SCAN on page 183.) For details about how to configure the
ControlCenter2 buttons to launch the application of your choice using
ControlCenter2 on page 181.
Note
• If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L)edge or 2sided (S)edge depending on your document layout.
• Choose your document layout from the following table:
Portrait
Front
Front
• Duplex scan is not supported by the DCP-8080DN and MFC-8480DN.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.
• The XPS file format is available for Windows Vista
Specification files.
(Scan) on the control panel, you have to install the Brother MFL-Pro Software Suite
®
. If you installed the MFL-Pro Suite from the included CD-ROM,
Back Front
Back Front
Document Layout Table
®
.
Landscape
Back
Back
®
or when using applications which support XML Paper
Scanning
(Scan) follows the
(Scan), see Using
LCD Message
(L)edge
(Long edge)
(S)edge
(Short edge)
9
9
171