Brother DCP-8080DN Software User's Manual page 213

Scan to OCR
When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh
designated on your network. ControlCenter2 will activate Prest!
into text for viewing and editing from a word processing application on the designated PC. You can change
the Scan configuration. (See OCR (word processing application) on page 186.)
a
Load your document.
b
Press (Scan).
c
Press a or b to choose Scan to PC.
Press OK.
d
Press a or b to choose OCR.
Press OK.
If your machine does not support Duplex Scan, go to step f.
If your machine supports Duplex Scan, go to step e.
e
Press a or b to choose 1sided, 2sided (L)edge or 2sided (S)edge.
Press OK.
f
Press a or b to choose the destination Macintosh
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination
®
Macintosh on the control panel.
Press OK.
g
Press Start.
The machine starts the scanning process.
Note
The Scan to OCR function is available for English, French, German, Dutch, Italian, Spanish, Portuguese,
Danish and Swedish.
®
PageManager
®
you want to send to.
Network Scanning
®
you
®
and convert your document
11
11
205