Using The Br-Script3 Driver (Post Script ® 3 ™ Language Emulation Printer Driver) - Brother DCP-9040CN Software User's Manual

Using the BR-Script3 Driver
®
(Post Script
Note
• To use the BR-Script3 printer driver, you need to set the Emulation to BR-Script 3 by using the
control panel before connecting the interface cable. (See Printer Emulation Support on page 132.)
• The BR-Script3 printer driver does not support the PC-Fax Sending.
• For network users, see the Network User's Guide for installation steps.
You need to install the BR-Script3 printer driver using the following instructions.
Note
If you use a USB cable and Mac OS
Setup Utility (Print Center for Mac OS
Printer list, you will need to delete it and then install the BR-Script3 printer driver.
a
Choose Applications from the Go menu.
b
Open the Utilities folder.
3 ™ language emulation printer driver)
®
, only one printer driver for a machine can be registered in Printer
®
10.2.X users). If a Brother Laser driver is already listed in the
Printing and Faxing
8
8
148