Calibration
The output density for each color may vary depending on the environment the machine is in such as
temperature and humidity. Calibration helps you to improve the color density.
a
For MFC-9440CN, press Menu, 4, 5.
For MFC-9840CDW, press Menu, 4, 6.
For DCP-9040CN, press Menu, 3, 5.
For DCP-9045CDN, press Menu, 3, 6.
b
Press a or b to select Calibrate.
c
Press OK.
d
Press 1 to select Yes.
You can reset the calibration parameters back to those set at the factory.
a
For MFC-9440CN, press Menu, 4, 5.
For MFC-9840CDW, press Menu, 4, 6.
For DCP-9040CN, press Menu, 3, 5.
For DCP-9045CDN, press Menu, 3, 6.
b
Press a or b to Reset.
c
Press OK.
d
Press 1 to select Yes.
Note
If an error message is displayed, press Stop/Exit and try again. For more information, see
Troubleshooting and routine maintenance in the User's Guide.
Auto Registration
Registration
If solid areas of color or images have cyan, magenta or yellow fringes, you can use the auto-registration
feature to correct the problem.
a
For MFC-9440CN, press Menu, 4, 6, 1.
For MFC-9840CDW, press Menu, 4, 7, 1.
For DCP-9040CN, press Menu, 3, 6, 1.
For DCP-9045CDN, press Menu, 3, 7, 1.
b
To start, press 1.
To exit, press 2.
c
Press Stop/Exit.
Printing and Faxing
8
8
8
8
135