Control panel setup
Restoring the network settings to factory default
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all wired and wireless network settings to the factory default.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Network Reset.
Press OK.
d
Press 1 for Reset.
e
Press 1 for Reboot.
Note
For DCP models, press a or + for Network Reset and then press a or + for Reboot.
f
The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.
For Touchscreen models
a
Press MENU.
b
Press Network.
c
Press Network Reset.
d
Press Yes.
e
Press Yes for 2 seconds to confirm.
6
6
6
114