Brother MFC-440CN User Manual page 92

Chapter 10
Remote commands
97 Check the receiving status
(MFC-440CN only)
1 Fax
97
Check the receiving status
-
(MFC 660CN and MFC-845CW only)
1 Fax
2 Voice
98 Change the Receive Mode
(MFC-440CN only)
1 External TAD
2 Fax/Tel
3 Fax Only
98
Change the Receive Mode
-
(MFC 660CN and MFC-845CW only)
1 TAD
2 Fax/Tel
3 Fax Only
90 Exit
80
Operation details
You can check whether your machine has received any
faxes. If yes, you will hear one long beep. If no, you will hear
three short beeps.
You can check whether your machine has received any
faxes or voice messages. If yes, you will hear one long
beep. If no, you will hear three short beeps.
If you hear one long beep, your change has been accepted.
If you hear one long beep, your change has been accepted.
Pressing 9 0 allows you to exit remote retrieval. Wait for the
long beep, then replace the handset.