The Printer Does Not Go On; The Printer Takes Time To Start Up - Canon imagePROGRAF iPF755 User Manual

Other problems
Other problems

The printer does not go on

The printer is unplugged.
The specied voltage is not supplied.

The printer takes time to start up

The printer may have shut down incorrectly last time.
This may happen after power outages or if the printer
is unplugged before it is turned off.
In this case, the next time power is restored, the
printer's hard disk is checked, and startup may take
some time.
746 Troubleshooting
Cause
Cause
Corrective Action
Plug the power cord into the outlet, and then turn on
the printer.
Check the voltage of the outlet and breaker.
Use a power source that conforms to the printer
specications.
(→P.73)
Corrective Action
Please wait a while, because it may take several
minutes to nish checking the hard disk.
If an error message is displayed after the hard disk
check, follow the instructions indicated to resolve the
problem.