D-Link DI-713P Quick Install Manual page 11

5 5
Configuring your printer Configuring your printer
C) Configuring your printer in C) Configuring your printer in
If you are using Windows 2000, please follow these instructions:
Go to START>
SETTINGS>
PRINTERS.
Right Click on the printer
icon that corresponds with
the printer that you have
connected to the DI-713P.
Select Properties, choose
the Ports tab.
Make sure that the
D-Link port is highlighted
as shown.
Click Configure Port.
Enter IP address.
Click OK at both screens.
You have completed configuring your printer in Windows 2000.
continued
D-Link Local Port
WINDOWS 2000 WINDOWS 2000