D-Link DI-713P Quick Install Manual page 2

Connecting the DI-713P Wireless Router Connecting the DI-713P Wireless Router
1 1
to your network to your network
Next, connect the WAN port to the
Cable/DSL modem. The WAN LED
will indicate connection.
Finally, connect computers with eth-
ernet adapters to one of the LAN
ports on the DI-713P.
2 2
Installing the DI-713P Installing the DI-713P
Checking the IP Address of the computer being
used to configure the DI-713P Wireless Router
Go to Start>Run
Type in "WINIPCFG".
The IP address of the computer must
be between 192.168.0.2 and
192.168.0.254 in order to configure
the router.
Click on the "Release All" and then
on the "Renew All" button to
obtain an IP address from the broad-
band router between 192.168.0.100.
and 192.168.0.199.
Note: If you are manually assign-
ing a static IP, please refer to
Appendix A.
continued continued