1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Gateway
  5. DG-104S
  6. Manual

D-Link DG-104S Manual

Voip station gateway
Hide thumbs Also See for DG-104S:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
D-Link DG-104S
VoIP Station Gateway
Manual
Version 1.10
Building Networks for People

Advertisement

Table of Contents
loading

Related Manuals for D-Link DG-104S

Summary of Contents for D-Link DG-104S

  • Page 1 D-Link DG-104S VoIP Station Gateway Manual Version 1.10 Building Networks for People...

  • Page 2: Table Of Contents

    Contents Package Contents ................3 Introduction....................4 Features and Benefits ................5 Getting Started ..................6 Understanding Indicators ...............9 Configuration ..................11 Using the Boot Menu ................21 Using Web-Based Management ............30 Command Line Interface ..............54 Technical Specifications ..............62 Waranty ....................65 Registration ..................68 Contacting Technical Support ..............69...

  • Page 3: Package Contents

    Package Contents Contents of Package: D-Link DG-104S VoIP Station Gateway Ethernet Cable (RJ-45) A/C Power Adapter If any of the above items are missing, please contact your reseller. System Requirements: Computers with Windows, Macintosh, or Linux-based operating systems with an installed Ethernet adapter Internet Explorer Version 6.0 or Netscape Navigator...

  • Page 4: Introduction

    WAN devices and the other may function as a connection to create a home or small office LAN network. Enabling NAT on the DG-104S will allow multiple clients to connect to the Internet. It can be configured/monitored via the Console, Web browser, or Telnet and SNMP management is also supported.

  • Page 5: Features And Benefits

    Features and Benefits Designed for versatility and performance, the DG-104S VoIP Gateway provides the following features: Four analog loop-start FXS interfaces using female RJ-11 connectors One 10/100 Fast Ethernet WAN port for connecting to a call agent One 10/100 Fast Ethernet LAN port for connecting to a local network...

  • Page 6: Getting Started

    Getting Started Identifying External Components Front Panel LED Indicator Panel: Refer to the next section titled, “Understanding Indicators,” for detailed information about each of the VoIP Gateway’s LED indicators. Rear Panel AC Power Connector: For the included power adapter. If you use a power adapter other than the one included with the product, please make sure that it has a DC output of 12VDC/1A.
  • Page 7 Visually inspect the power cord and see that it is secured to the AC power connector. Do not place heavy objects on the DG-104S at any time. Placing the DG-104S in a well ventilated area is very important. Not doing so may cause damage to the unit.
  • Page 8 Connecting the VoIP Gateway to a Computer The DG-104S requires a straight-through cable when connecting to a computer. Make sure that your IP address on your Ethernet card is in the same subnet as the DG-104S otherwise it will not connect.

  • Page 9: Understanding Indicators

    Power: This LED is lit when the device is receiving power; otherwise, it is unlit. Status: This LED will flash quickly when the DG-104S is either perform- ing a self test or booting up. The LED will remain lit when the system is ready for a connection with the Gatekeeper.
  • Page 10 Understanding Indicators LAN: This LED displays the connection speed, link status, and activity on the 10/100 dual-speed Ethernet port that is used to connect to your LAN. 10/100M: This indicator remains unlit when there is no connection, or the port is operating at 10Mbps through a connection to a 10BASE-T device.

  • Page 11: Configuration

    Configuration Configuring the VoIP Gateway There are two ways to configure the VoIP gateway: Using a terminal or computer running terminal emulation software connected to the diagnostic port via an RS-232 cable. In the discussion below, the terminal (or computer) is referred to as a console and the connection, a console connection.
  • Page 12 Configuration Configuring the VoIP Gateway 8 data bits (sometimes called a “word length” of 8 bits) 1 stop bit (sometimes referred to as a 1-bit stop interval) No Flow control Arrow keys enabled A typical console connection is illustrated below: Example of a Console Connection Configuring the VoIP Gateway Using Telnet Once you have set an IP address for your device, you can use a Telnet pro-...
  • Page 13 Configuration Configuring the VoIP Gateway The up and down arrow keys, the left and right arrow keys, the Tab key, and the Backspace key can be used to move between selected items. It is recommended that you use the Tab key and Backspace key for moving around the console.
  • Page 14 Configuration Configuring the VoIP Gateway Configuration Settings In order for the VoIP to function, you must provide the device with the following information: Where the device receives its IP settings from. IP settings – IP Address, Subnet Mask, and Default Gateway Notify Entity –...
  • Page 15 Configuration Configuring the VoIP Gateway Notify Entity: Enter the appropriate information for your call agent into this field. Residential GW: This is the name your VoIP gateway will be known as by the call agent. It usually consists of the IP address or a normal name. DNS: Enter the IP address for the closest DNS server in this field if enables the DNS function.
  • Page 16 Configuration Configuring the VoIP Gateway The VoIP gateway comes with a default IP address of 10.1.10.4. You must make sure that your computer is in the same subnet as the VoIP gateway. You can do this by changing the IP address of the computer using the screen shown below.
  • Page 17 Configuration Configuring the VoIP Gateway Click on the Login to the web-based management module button in the middle of the window. The following window will be displayed: Initially, the VoIP gateway does not have a Username or Password. To log in, simply click on the OK button.
  • Page 18 Configuration Configuring the VoIP Gateway To begin configuring the device, click on the Config IP folder on the left-hand side of the window (shown below). Next, click on Config Device IP Address. The following window will appear: Configure Device IP Address window...
  • Page 19 Configuration Configuring the VoIP Gateway The items on this window are described below: Restart Settings Get IP From: Select the method the VoIP gateway will use to obtain its IP settings once it is rebooted. Choices include: Manual: When Manual is selected, the VoIP gateway will obtain its IP settings from the fields located just below.
  • Page 20 Configuration Configuring the VoIP Gateway Configure Call Agent IP Address window The items on this window are described below: Notify Entity: Enter the appropriate information for your call agent into this field. RGW Name: This is the residential gateway name your VoIP gateway will be known as by the call agent.

  • Page 21: Using The Boot Menu

    Using the Boot Menu To access the Boot Menu, you must first make sure the console is connected to the Diagnostics port (an RS-232 port with a 9-socket D-shell connector and DCE-type wiring) and the appropriate cabling for the connection is being used. Please see the previous section, “Configuration,”...
  • Page 22 Using the Boot Menu Configuring the IP Use the arrow keys to highlight the first menu item on the Boot Menu, Configure IP, and press <Enter>. The IP Configuration screen will be displayed: Boot Menu—IP Configuration screen Each item on the IP Configuration screen is described below: Notify Entity: Enter the appropriate information for your call agent into this field.
  • Page 23 Using the Boot Menu Configuring the IP IP address: Enter an IP address for the VoIP gateway. Subnet mask: Enter a subnet mask for the VoIP gateway. Default gateway: Enter the IP address of the WAN device (usually a router) you are using to make the WAN connection After you have finished, press <Ctrl+S>...

  • Page 24: Device Information

    IP: Enter the IP address of the trap manager. Device Information This screen displays various types of information about the DG-104S as well as allowing you to enter information pertaining to name, location, and how to reach the person responsible for maintaining the device.
  • Page 25 Using the Boot Menu Device Information Each item on the Device Information screen is described below: Device Type: This displays the model name of this device. MAC Address: This displays the MAC address of this device. Serial Number: This displays the serial number of this device. Boot PROM Version: This displays the version number of the device’s startup code.
  • Page 26 Using the Boot Menu Update Boot and Application Files Boot Menu—Update Boot and Application Files screen After making your changes in the fields above, press RESET DEVICE TO START UPDATE to initiate the update sequence. Each item on the Update Boot and Application Files screen is described below: Software Update Mode: This specifies downloading the image file through a WAN Link.
  • Page 27 Using the Boot Menu Update Firmware and Configuration Files File Name: The complete path and filename on the TFTP server for the desired configuration file. Last TFTP Server Address: This is a read-only field that displays the IP address of the last TFTP server to be accessed. Save Changes To save all the changes made in the current session to the device’s flash memory, use the arrow keys to highlight the fourth menu item on the Boot Menu, Save...
  • Page 28 Using the Boot Menu Factory Reset Note: After performing the Factory Reset, make sure to redefine the IP settings for the device in the IP Configuration menu. Then perform a Restart System on the device. After these three procedures are performed, your Factory Reset is complete.
  • Page 29 Using the Boot Menu Restart System Boot Menu—Restart System screen...

  • Page 30: Using Web-Based Management

    Using Web-Based Management The DG-104S VoIP gateway offers an embedded Web-based (hypertext) inter- face allowing users to manage the device from anywhere on the network through a standard browser such as Netscape Navigator/Communicator, 6.x or later, or Microsoft Internet Explorer, 6.x or later. The Web browser acts as a univer- sal access tool and can communicate directly with the device using HTTP protocol.
  • Page 31 Using Web-Based Management Management The categories listed on the left-side of the web-based management module include: Config IP (Config Device IP Address and Config Call Agent IP Address), Device Information, Telephony Configuration, DHCP Configu- ration (Dynamic IP Assignment and Static IP Assignment), NAT Configu- ration (NAT Configuration and Local Server Configuration), SNMP Trap Configuration, Administration Management, Monitor (Ethernet Statistics, DSP Statistics, Tcid Configuration, Coding Profile, and xGCP Configu-...
  • Page 32 Using Web-Based Management Configure Device IP Address DHCP: When DHCP is selected, the VoIP will attempt to obtain its IP settings from a DCHP server located on your LAN. IP Address: Enter an IP address for the VoIP gateway. Subnet Mask: Enter a subnet mask for the VoIP gateway. Default Gateway: Enter the IP address of the WAN device (usually a router) you are using to make the WAN connection.
  • Page 33 Using Web-Based Management Configure Call Agent IP Address The items on this window are described below: Notify Entity: Enter the appropriate information for your call agent into this field. RGW Name: This is the residential gateway name your VoIP gateway will be known as by the call agent.
  • Page 34 Using Web-Based Management Device Information The items on this window are described below: Device Type: This displays the model name of this device. MAC Address: This displays the MAC address of this device. Boot PROM Version: This displays the version number of the device’s startup code.

  • Page 35: Telephony Configuration

    Using Web-Based Management Telephony Configuration Telephony Configuration window Enter the desired information on the window above and then click Save.
  • Page 36 Using Web-Based Management Dynamic IP Assignment Dynamic IP Assignment window Enter the desired information on the window above and then click Save.
  • Page 37 Using Web-Based Management Static IP Assignment First Static IP Assignment window Click the pointer icon on the window above to access the second Static IP Assignment window:...
  • Page 38 Using Web-Based Management Static IP Assignment Second Static IP Assignment window Enter the desired information on the window above and then click Save.

  • Page 39: Nat Configuration

    Using Web-Based Management NAT Configuration NAT Configuration window After entering the desired information into the window above, enable or disable the NAT Function and then click Save.
  • Page 40 Using Web-Based Management Local Server Configuration First Local Server Configuration window This window allows you to view the current local server configuration settings. Click the pointer icon on the window above to access the second Local Server Configuration window.
  • Page 41 Using Web-Based Management Local Server Configuration Second Local Server Configuration window After completing the local server configuration settings on the window above, select enabled or disabled in the drop-down menu under State and then click Save.
  • Page 42 Using Web-Based Management SNMP Trap Configuration SNMP Trap Configuration window The items on this window are described below: Trap Manager IP Address: The IP address of the trap receiving station. Community Name: A user-defined SNMP community name. SNMP AuthTrap: This allows you to enable or disable the SNMP trap. Click on the Save button at the bottom right of the window to save the settings.
  • Page 43 Using Web-Based Management Administration Management Administration Management window To add or change a User Account, fill in the appropriate information in the User Name, Old Password (if applicable), New Password, and Confirm New Password fields. Click on the Save button to keep the settings.
  • Page 44 Using Web-Based Management Ethernet Statistics Ethernet Statistics window The items on this window are described below: Rx Packets: The total number of packets received by the device. Rx Bytes: The total number of bytes contained in packets received by the device. Rx Non Ucast Packets: The number of non-unicast packets received by the device.
  • Page 45 Using Web-Based Management Ethernet Statistics Rx Collision Errors: The number of collision errors. Rx Short Frames: The number of packets smaller than the 64-octet minimum. Rx CRC Errors: The number of packets received that failed the CRC checksum test. Rx Overrun Packets: The number of packets received that exceed the 1518 octet maximum length imposed on Ethernet packets.
  • Page 46 Using Web-Based Management DSP Statistics DSP Statistics window This window displays a variety of DSP statistics.
  • Page 47 Using Web-Based Management Tcid Configuration Tcid Configuration window This read-only window displays a variety of Tcid configuration settings.
  • Page 48 Using Web-Based Management Coding Profile Coding Profile window This read-only window displays various Coding Profile settings.
  • Page 49 Using Web-Based Management xGCP Configuration xGCP Configuration window This read-only window displays settings related to xGCP Configuration.
  • Page 50 Using Web-Based Management Firmware and Configuration Update Firmware and Configuration Update window The items on this window are described below: Software Update Mode: This specifies downloading the image file through a WAN Link or Lan Link. TFTP Server Address: The IP address of the TFTP server where the runtime or configuration file is located.
  • Page 51 Using Web-Based Management Save Changes Save Changes window After the settings have been saved to NV-RAM, they will become the default settings for the device, and they will be used every time it is powered on, reset or rebooted. The only exception to this is a factory reset, which will clear all settings and restore them to the initial values present when the device was purchased.
  • Page 52 Using Web Based-Management Factory Reset Factory Reset to Default Value window Before performing a Factory Reset, be absolutely certain that this is what you want to do. Once the reset is complete, all of the device’s settings stored in NV- RAM will be erased and restored to the values present when the device was purchased.
  • Page 53 Using Web-Based Management Restart System Restart System window To perform a reboot of the device, which resets the system, click the Restart button.

  • Page 54: Command Line Interface

    Command Line Interface The DG-104S VoIP gateway offers a line-at-a-time prompt and response scheme to execute various configuration instructions. The interface displays a single prompt character ggdbg> when it is ready to accept a command (ex. ggdbg>set or ggdbg>show). Typing a question mark after the ggdbg> prompt will display a list of helpful user commands.
  • Page 55 Command Line Interface General Setup Commands nwdbg un <USERNAME> Definition: This command sets the username if there is a username string, or shows the username/password if only nwdbg un is typed. Parameter(s): <USERNAME, maximum string length is 12 characters> Example: nwdbg un 123456789012 nwdbg pw <PASSWORD>...
  • Page 56 Command Line Interface General Setup Commands nwdbg dtmf_relay <0|1> Definition: This command turns the Dual Tone Multiple Frequency (DTMF) relay function on or off, or shows the DTMF relay state if only nwdbg dtmf_relay is typed. Parameter(s): <0 : off, 1 : on> Example: nwdbg dtmf_relay 0 nwdbg mac <MAC ADDRESS>...
  • Page 57 Command Line Interface General Setup Commands nwdbg ip <IP ADDRESS> Definition: This command sets the fixed IP address, which is used as the system’s IP address if the software boot mode is Manual mode. If only nwdbg ip is typed, this command shows the IP configuration.
  • Page 58 Command Line Interface General Setup Commands nwdbg tftp <0|1> Definition: This command sets the software download link to either a WAN link or a LAN link. If only nwdbg tftp is typed, this command shows the download link. Parameter(s): <0:WAN link, 1:LAN link> Example: nwdbg tftp 0 nwdbg ca <NOTIFY ENTITY>...
  • Page 59 Command Line Interface General Setup Commands nwdbg dns <DNS IP> Definition: This command sets the Domain Name Server’s IP address. If only nwdbg dns is typed, this command shows the DNS IP/STATE. Parameter(s): <DNS IP> Example: nwdbg dns 10.1.1.5 nwdbg dns <disable|enable> Definition: This command turns on/off the DNS function.
  • Page 60 Command Line Interface General Setup Commands ping <DEST IP> <OPTIONS> Definition: This command lets the user ping an IP address from the device. Parameter(s): <DEST IP: The host ip address> <OPTIONS, -t : Ping the specifed host until stopped (type SPACE). -n count: Number of echo requests to send.
  • Page 61 Command Line Interface TFTP Client Setup Commands tftp srvip <IP ADDRESS> Definition: This command sets the IP address of the TFTP server. The image must be resident on that TFTP server. If the IP address is invalid, the message ERROR will be displayed.

  • Page 62: Technical Specifications

    Technical Specifications Call Control Protocols Compliance MGCP Voice Compression G.711 (A-law and u-law), G.723.1, G.729a Analog Voice Ports Type: Loop-Start FXS interfaces DTMF tone detection/generation V.21/V.25 Modem/Fax tone detection Echo Cancellation: G.165/G.168 Ethernet Ports WAN: NWay 10/100BASE-TX Fast Ethernet ports (MDI-II) LAN: NWay 10/100BASE-TX Fast Ethernet ports (MDI-X) IEEE 802.3 10BASE-T Ethernet compliance IEEE 802.3u 100BASE-TX Fast Ethernet compliant...
  • Page 63 Technical Specifications Network Management SNMP management agent base MIB II Telnet provisioning Manage functions through an intuitive web-based graphical user interface Local management console TFTP: The built–in Trivial File Transfer Protocol provides firmware upgrade Security Password Authentication Protocol/Challenge Handshake Authentication Protocol (PAP/CHAP) Administrative password through Telnet, Console, Web and SNMP LEDs...
  • Page 64 Technical Specifications Power Supply AC-to-DC power adapter (provided) DC Input: 12VDC/1A Operating Temperature -10 - 55 °C Storage Temperature -10 - 70 °C Humidity 5% - 95% non-condensing Safety CSA International (CSA 950, UL 1950, EN 60950, IEC 950) Emission (EMI) FCC Class B VCCI Class B BSMI Class B...

  • Page 65: Waranty

    D-Link’s sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund at D-Link’s sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new or have an identical make, model or part.
  • Page 66 D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product...
  • Page 67 REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY Governing Law: This Limited Warranty shall be governed by the laws of the State of California.

  • Page 68: Registration

    Registration Register online your D-Link product at http://support.dlink.com/register/...

  • Page 69: Contacting Technical Support

    Support cal Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product.

Table of Contents