D-Link DP-301P+ User Manual page 15

Using the Web Configuration (continued)
Network (continued)
TCP/IP Protocol
IP Address:
Subnet Mask:
Default Gateway:
IP Assignment:
Manually Assign:
address in the field above.
Assign Automatically Using:
SNMP Community 1-3:
protocols for managing complex networks.
Name:
Access Right:
Read/Write.
Net BEUI Protocol
Net Bios Extended User Interface is an enhanced version of the NetBios protocol
that is used by many LAN managing systems.
Workgroup:
Maximum Limitation:
AppleTalk Protocol
AppleTalk Zone:
Chooser Name:
Printer Type:
PostScript Level:
Font Group:
Save: Click Save to save the changes.
The default IP address is 192.168.0.10
The default subnet mask is 255.255.255.0
Enter the IP address of the default gateway (router).
Select this option when you manually input the IP
RARP: Reverse Address Resolution Protocol is a TCP/IP
protocol that assigns an IP address using MAC address
information.
BOOTP: Bootstrap Protocol can provide an IP address to
the print server.
DHCP: Dynamic Host Configuration Protocol automati-
cally assigns an IP address to the print server.
Simple Network Management Protocol is a set of
Enter a name.
Select from the pull-down menu. Read Only or
Enter a name for the Workgroup.
Enter the maximum number of connected stations.
Enter an asterisk.
Enter the printer name.
Enter the printer type.
Enter the PostScript level.
Enter the font group.
15