To Install A Ram Expansion Module - HP OmniBook 7100 Reference Manual

To install a RAM expansion module

Your OmniBook's computer chips are extremely static-sensitive. Static electricity can
permanently damage computer chips. Before starting, reading the caution on
page 5-6 about how to handle RAM expansion modules.
1. Unplug the ac adapter, if present, and remove the battery.
2. Turn the unit bottom side up and unsnap the RAM cover.
3. Insert the RAM board into the connector at about a 30° angle until it is fully
inserted. Then press down at both sides until both latches snap closed.
4. If only one RAM board is present, you can install it in either connector.
Expanding the OmniBook
5-7