Panasonic AG-HMC40 Operating Instructions Manual page 103

RECORD SETUP screen (continued)
Display
Item
mode
WIND CUT CAMERA
MIC ALC CAMERA
MIC LEVEL CAMERA
SEL
META CARD CAMERA
READ
META DATA CAMERA
REC
USER CLIP CAMERA
NAME
META DATA CAMERA
PROP
CLIP CAMERA
COUNTER RST
META INITIAL CAMERA
SET
: Can also be configured in Quick Menu. (Page 96)
Q.MENU
Reduces noise caused by strong wind blowing against the built-in mic.
ON OFF
• When an external mic or an XLR Microphone Adapter is connected,
this setting is fixed at OFF.
Sets mic level auto control to ON or OFF (CH1 and CH
simultaneously).
ON OFF
• Set to ON to reduce distortion at high input levels. To adjust the
recording level of audio signals (not related to this setting), adjust the
mic settings in the Function Navi.
Selects whether to fix built-in mic and external mic input to a standard
level.
FIX: Fixes the input level.
MANUAL: Enables manual input level adjustment.
• Adjust input levels with the mic input level setting in the Function
Navi.
• When an XLR Microphone Adapter is connected, the camera's mic
input level is fixed. Adjust the volume on the microphone adapter to
adjust the input level.
Loads the metadata recorded on the SD Memory Card into the unit.
Up to 8 metadata files stored on the SD Memory Card (MTDT00 to
MTDT07) are displayed in a list. Files with no corresponding data are
displayed in gray.
• Displayed in gray when metadata is not stored on the SD Memory
Card.
Sets whether to record the metadata to be loaded into the unit
simultaneously on a SD Memory Card.
ON: Records simultaneously.
OFF: Does not record simultaneously.
Selects the method of CLIP NAME recording.
TYPE1: User clip name is the same as the CLIP NAME if there is no
uploaded metadata or data.
TYPE2: User clip name is the same as the CLIP NAME if no
combination of data and COUNT value is uploaded, or if there
is no uploaded data.
Displays the metadata which has been recorded in the unit.
CLIP NAME
ACCESS
SHOOT
SCENARIO
NEWS1
NEWS2
MEMO1
MEMO2
Resets the COUNT value to 1.
YES NO
Returns metadata stored on the camera to factory default conditions.
All metadata settings, including ON/OFF settings for META DATA REC,
are cleared.
YES NO
Description of settings
indicates the factory setting.
103