Table of Contents
Advertisement
Recording
OPEN/CLOSE
NUMBER keys
STOP
▲▼◄►
AUDIO
Front view
Recording television programs
RAM
DVD-R
• It is not possible to record continuously from one side of a double sided
disc to the other. You will need to eject the disc and turn it over.
• When using 8 cm (3") DVD-RAM, remove the disc from the cartridge.
• You can record up to 99 titles on one disc.
• You can record digital broadcasts that allow "one time only recording"
when using CPRM (p. 70) compatible DVD-RAM discs. And you cannot
record digital broadcasts that allow "one time only recording" when using
DVD-R.
• DVD-RAM/DVD-R have limitations on recording (pp. 8~10).
• Recording will take place on open space on the disc. Data will not be
overwritten.
• If there is no space left on the recording disc, you will need to erase
unwanted titles (pp. 47, 52) or use a new disc.
• You cannot record on finalized DVD-R discs.
Preparation
• Release protection before proceeding:
- Cartridge (p. 9)
RAM
- Disc (p. 60)
RAM
1
Press OPEN/CLOSE on the unit to open the tray and
insert a disc. (p. 34)
• Press the button again to close the tray.
•
When using a DVD-RAM for the first time with this unit,
RAM
format it to ensure accurate recording. (Refer to "Format Disc" on
page 61.)
38
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
CH ▲▼
PAUSE
ENTER
RETURN
REC MODE
REC
F REC
Front Display
2
Press CH ▲▼ or NUMBER keys to select the
channel.
e.g., When you select
channel 4
To select with the NUMBER keys:
e.g., 5:
[0] → [5]
15: [1] → [5]
115: [1] → [1] → [5]
3
Press REC MODE to select the recording mode. (See
next page.)
e.g., When you
select "XP"
XP*
* To record sound using LPCM (possible only in XP mode):
Select "LPCM" in "Audio for XP Recording" (the picture quality may
go down slightly). (p. 69)
4
Press REC to start recording.
• You cannot change the channel or recording mode during recording.
• You can change the audio being received by pressing AUDIO during
recording.
To specify a time to stop recording
During recording
Press REC on the unit or the Remote Control to select the
recording time.
Each time you press the button:
OFF
0:30
1:00
4:00
3:00
• This does not work during timer recordings (pp. 40~41) or while
using Flexible Recording (p. 39).
• Recording stops and the set time is cleared if you press STOP.
• The set time is cleared if you change the recording mode or
channel while recording is paused.
To stop recording
Press STOP.
• Recorded as 1 title until the position where stopped.
•
It takes about 30 seconds for the unit to complete
DVD-R
recording management information after recording finishes.
To pause recording
Press PAUSE.
Press again to restart recording.
SP
LP
EP
1:30
2:00
Advertisement
Table of Contents
