Table of Contents
Advertisement
PRECAUTIONS
To ensure safe operation, please observe the follow-
ing precautions:
Use (2) AAA alkaline batteries, see page 8.
Replace both batteries at the same time. Do not use a
new battery with a used battery.
REMOTE CONTROL KEYS
Œ
Input Key—Press to change the input signal
source as follows: Analog RF ¬ Digital RF ¬ Video1
¬ Component2 ¬ Component3 ¬ Analog RF.
Number Keys—Two keys must be pressed to select
a channel. Example: Press 0 then 6 to select channel
6. For Analog cable channels above 100, press and
hold the 1 key until C1– – appears.
Ž
Info Key—Press to display Digital Full Banner or Analog
Brief Banner information (press the INFO key again to
remove the display).
Digital Off-air Channel Full Banner—Contains a two-
part Channel Number (Major and Minor). If available,
the following is also included—Station ID, Program
Title, Date / Time (if set), Signal Strength, Video Resolu-
tion, V-Guide Program Rating, and Audio Reception.
Program
Virtual Channel
Title
Major
Minor
Video Resolution
Signal Strength
Digital Off-air Channel Full Banner
14
USING THE REMOTE CONTROL
Current
Station ID
Time/Date
V-Guide
Audio
Program Rating
Reception
Risk of explosion, if battery is replaced by an incorrect
type.
If batteries have leaked in the Remote Control Unit,
carefully wipe the case clean and load new batteries.
Do not expose the Remote Control Unit to moisture,
or heat.
Digital Cable Channel Full Banner—Contains a two-
part Cable Channel Number (Major and Minor). If
available the following is also included—Date / Time (if
set), Signal Strength, Video Resolution, V-Guide
Program Rating, and Audio Reception.
Virtual Channel
Cable
Major
Minor
Indicator
"DC"
Video Resolution
Signal Strength
Digital Cable Channel Full Banner
05
Analog
NBC
Antenna
10:26 pm
10:26 pm
Analog Brief Banners
Recall Key—Select the first channel you want to
watch; then select another channel using the
NUMBER keys. Press RECALL to easily switch
between the channels.
The
key can not toggle between a Digital
NOTE:
RECALL
and Analog channel. See
Menu key—Press this key to display the on-screen
setup menu.
‘
Tuner Key—Use this key to toggle from one tuning
system to another, digital channels and analog channels.
NOTE: The TUNER key is inactive when an external input is
selected (Video1, Compo 2, or Compo 3).
Current
Time/Date
V-Guide
Program Rating
C 39
Analog
FOX
Video 1
Cable
10:26 pm
key description.
TUNER
Audio
Reception
Video 1
Input
Hide quick links:
Advertisement
Table of Contents
