Screen Saver - Sanyo DP42545 Owner's Manual

SETUP MENU OPTIONS (CONTINUED)

Screen Saver

Displaying a still picture for a long
time may cause an "afterimage" or
"ghost" on the screen. To neutralize
this situation, a Picture Rotation func-
tion is provided.
Use this
protect the Plasma screen from
"afterimage."
If an afterimage occurs, use the White
Pattern feature immediately to repair
the panel. The more severe the after-
image, the longer the curing process
may take. It may be impossible to
repair all cases of afterimage burn.
The sooner you remove a still picture
and activate White Pattern, the more
likely it is that the panel can be
repaired.
NOTE: Afterimage (or image burn) is not
covered under warranty.
1 Press the TUNER key to select
the Analog Tuner. (NOTE: The
Screen Saver setting is available
only from the Analog Main
menu. However, it functions in
all modes.)
2 Press the MENU key to display
the Main menu.
Use the CURSOR LM keys to
3
highlight the Setup category.
Press ENTER.
26
Picture Rotation Setup (saver)
Use the CURSOR LM keys to
4
highlight the Screen Saver option.
Press ENTER.
Use the CURSOR LM keys to
5
highlight Picture Rotation . Press
ENTER.
feature to
6 Use the CURSOR
select On, then use the LM
keys to highlight Cycle Time .
Then use the
cycle time of 15 Minutes, 30
Minutes, or 60 Minutes.
7 Press the EXIT key to return to
normal TV viewing.
White Pattern Setup (panel repair)
Use the CURSOR LM keys to
4
highlight the Screen Saver option.
Press ENTER.
Use the CURSOR LM keys to
5
highlight White Pattern . Press
ENTER.
Use the LM keys to highlight
keys to 6
Display Time . Then use the
keys to set a display time of
keys to set a 10 Minutes, 30 Minutes, or
60 Minutes, depending on the
severity of the afterimage.
Use the LM keys to highlight
7
White Pattern . Then use the
CURSOR
NOTE: Pressing
keys to select On.
any key except
LM
VOLUME and AUDIO will
cancel the curing process and
return the TV to normal viewing.